MILWAUKEE CRANE RESOURCE LIBRARY

A Resource Library of Our Products and Services

Hoists & Parts

  • Yale Hoists

    Yale Hoists

    Chain Hoists, Wire Rope Hoists, Air Hoists, Crane Components


    There's a Yale product for every lifting job.


    Yale variety lets you match your hoist to the job for maximum dollar value. Hoists in the Yale line are quality engineered and performance tested before they are shipped to you. That's why the Yale name has stood for quality for over 100 years.


    Look up to Yale for excellence in hoisting equipment.


    Chain Hoists

    • Electric - 300 lbs to 3 tons
    • Air - 1/4 to 6 tons
    • Manual - 1/4 to 50 tons
    • Low Headroom - 1/4 to 24 tons
    • Army Type - 1/4 to 12 tons
    • Spark Resistant

    Lever Hoists

    • Aluminum Frame - 3/4 to 6 tons
    • Malleable Iron Frame - 3/4 to 15 tons
    • Steel Frame - 3/4 to 6 tons
    • Wire Rope Pullers - 1/2 to 1 ton

    Trolleys

    • Push - 1/4 to 50 tons
    • Hand Geared - 1/4 to 50 tons
    • Motorized - 1/4 to 3 tons
    • Hook Mount - 1/4 to 50 tons
    • Lug Mount - 1/4 to 3 tons
    • Tractor Drives - 1/4 to 5 tons
    • Spark Resistant

    Global King Wire Rope Hoist

    • 5, 7 1/2 & 10 ton models
    • Metric capacity rated
    • Low headroom design for maximum lift
    • Designed for H4 service minimum
    • Electrics to N.E.C. standards
    • 2-speed hoists & trolleys
    • NEMA 4/12 panel
    • 6:1 ratio on hoist, 3:1 on trolley, high to low speeds
    • Upper / lower geared limit switch
    • Upper block operated limit switch
    • Runs on beam flanges 4 5/8”- 20” wide; on beams to 2” thick
    • Hoist gearing in separate, easily accessible gear case

    Wire Rope Hoists

    • 1/2 to 35 ton capacity
    • Electric
    • Air Operated
    • Low Headroom
    • Spark Resistant
    • Explosion Proof

    Top-Running Trolleys

    • 5 to 35 ton capacity
    • Electric
    • Air Operated
    • Spark Resistant
    • Explosion Proof

    Crane Components

    • 1 to 35 ton capacity
    • Top-Running
    • Under-Running
    • Single Girder
    • Double Girder
    • Electric
    • Air Operated
    • Spark Resistant
    • Explosion Proof

    Other Yale products (not shown)

    • Jib Cranes
    • Test Stands

    Contact Milwaukee Crane for assistance and product information on Yale Hoists.

  • Budgit Hoists

    Budgit Hoists

    There's a Budgit Hoist for Every Job.


    Budgit Hoists: Tough jobs demand tough Budgit hoists.


    For over 60 years, BUDGIT� Chain Hoists have been designed and manufactured for tough jobs.


    Since 1935, BUDGIT� has led the industry in innovation, quality and dependability. These compact, lightweight, economical hoists are built to withstand the rigors of heavy service and repeated lifting cycles.


    They are easy to service, require minimal maintenance and offer excellent headroom.


    Budgit Chain Hoists

    • Electric - 300 lbs to 7-1/2 tons
    • Air - 1/4 to 3 tons
    • Manual - 1/4 to 50 tons
    • Army Type - 1/4 to 12 tons
    • Low Headroom - 1/4 to 24 tons
    • Swivel Truck - 1/4 to 6 tons
    • Twin Hook - 1/2 to 10 tons
    • Spark Resistant

    Lever Hoists

    • Tugit�2 Aluminum Frame - 3/4 to 6 tons
    • Steel Frame - 3/4 to 6 tons
    • Wire Rope Pullers - 1/2 to 1 ton

    Trolleys

    • Push - 1/4 to 50 tons
    • Hand Geared - 1/4 to 40 tons
    • Motorized - 1/4 to 7-1/2 tons
    • Hook Mount - 1/4 to 50 tons
    • Lug Mount - 1/4 to 7-1/2 tons
    • Tractor Drives - 1/4 to 5 tons
    • Spark Resistant

    Crane Components

    • Under-Running End Trucks & Kits - 1/4 to 5 tons, spans to 36'
    • Top-Running End Trucks & Kits - 1/4 to 5 tons, spans to 36'
    • Spark Resistant

    Other Budgit products (not shown)

    • Articulating Jib Cranes
    • Test Stands

    Please contact Milwaukee Crane's expert staff for applications assistance for Budgit Hoist products.

  • C M Lodestar Hoists

    CM Hoists

    Chain and Wire Rope Hoists - Electric and Pneumatic


    CM hoists are manufactured by Columbus McKinnon Corporation, a leading designer and manufacturer of material handling products, systems and services which efficiently and ergonomically move, lift, position or secure material.


    CM AirStar 6 Air Hoist

    Designed for general industrial applications where variable speed pneumatic power is preferable. Rated for loads of up to 3 tons. This compact, lightweight hoist features:

    • Lightweight aluminum frame and cover
    • Positive action, spring biased Weston-type load brake holds the load, provides exacting load spotting and control
    • Multi-vane rotary air motor with eight vanes for high torque, smooth operation, positive starting
    • Precision cut heat treated helical and spur gear combination for quiet, efficient operation
    • Pendant throttle handle is full flow design for precision throttle capabilities
    • Lifetime warranty
    • Made in U.S.A.

    CM AirStar Air Hoist

    Designed for general commercial applications where variable speed pneumatic power is preferable. Rated for 1/4, 1/2 and 1 ton capacities, this compact, lightweight hoist features:

    • Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
    • Positive action, heavy-duty shoe type brake that holds the load
    • Multi-vane rotary air motor for high torque, smooth operation
    • Accurately machined heat treated alloy steel spur gears
    • Spark resistant models available for hazardous environments
    • Pull cord or pendant throttle control available
    • Pull cord control hoists provide a lightweight, economical hoist for accurate control of loads
    • Made in U.S.A.

    CM Lodestar Air XL Pneumatic Chain Hoist

    • Lifting capacities up to 7 1/2 tons
    • Variable lifting speeds
    • Maximum lifting speed of 31 feet per minute
    • Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed and reduced chain wear
    • Standard overload protector
    • Clutch acts as upper and lower limits
    • Six-Vane rotary air motor
    • Pendant controls provide precise load spotting
    • Air actuated motor brake for positive load control
    • Factory tested at 125% of rated capacity
    • Spark resistant models available
    • Lifetime warranty
    • Made in U.S.A.

    CM Lodestar Electric Chain Hoist and Trolleys

    The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:

    • Up to 3 ton capacities for heavy-duty industrial applications
    • Gear train lifetime lubricated with non-oxidizing grease
    • Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
    • Gearing designed for exceptionally long life and quiet operation
    • H4 duty standard
    • Rugged control station (NEMA 4)
    • Hoist duty motor, standard Protector overload device and standard screw type limit switches
    • Made in U.S.A.

    CM Lodestar XL Electric Chain Hoists

    • Lifting capacities from 2 to 7.5 tons
    • Maximum lifting speed of 30 feet per minute
    • Thermally protected motor
    • Standard overload protector
    • Heavy-duty, multiple disc braking system
    • Gearing operated in oil bath

    CM Powerstar Electric Chain Hoist and Trolleys

    Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist. Features:

    • H-4 or better rated duty cycle
    • Designed for heavy-duty industrial applications from 2 to 20 ton capacities
    • Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
    • Efficient regenerative braking system avoids heat generation in power train
    • Heavy-duty multiple disc D.C. brake (dual braking system)
    • Standard overload Protector device
    • Lifetime warranty
    • Made in U.S.A.
    • 2 thru 20 ton capacities available

    CM ShopAir

    The CM ShopAir heavy-duty air chain hoist can be used as a

    work station hoist or as a production line hoist. Lightweight, rugged

    and compact design - for ease of portability - makes this hoist perfect for most air hoist lifting applications.

    • CAPACITIES: 250 - 1,000 lbs.
    • SPEEDS: up to 31 ft./min.
    • AIR PRESSURE: Normal operating pressure is 90 PSI (capacities based on 80 PSI)
    • Standard Protector overload device.
    • Variable flow, two lever pendant for precise load spotting.
    • Threaded external exhaust for piping away exhaust in clean room or painting applications.
    • Small, compact design for commercial & industrial applications.
    • Gear train is lifetime - lubricated with non-oxidizing grease.
    • Lifetime warranty against defects in materials and workmanship.
    • Made in USA.

    CM ShopStar Electric Chain Hoist

    • The ShopStar portable electric chain hoist features rugged construction and high H4 duty cycle. It keeps lifting and lifting, up to 1,000 pounds and 300 motor starts per hour.
    • 10 pocket oblique lay liftwheel provides longer chain wear
    • NEMA 4 industrial rated control station
    • Gear train lifetime lubricated with non-oxidizing grease
    • CM Hoist Alloy Load Chain
    • Dual braking system - D.C. plus regenerative

    CM Valustar Electric Chain Hoist

    Designed specifically for general commercial applications. This compact, lightweight hoist features:

    • Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear
    • Standard lift 10, 15 & 20 ft.
    • 5 ft. power cord length
    • Heavy-duty caliper type AC brake
    • Rugged NEMA 4 control station, 115 volt control circuit
    • Easy to install and maintain
    • Hoistaloy load chain for smooth operation and maximum chain life
    • Efficient regenerative braking system to avoid heat generation in power train
    • Made in U.S.A.

    CM Air Manipulator Hoist

    The CM TMM-140 is ideal for workstation applications.  Lightweight and portable, the unit weighs less than 20 pounds and operates at 100% (A5) duty cycle.

    • Smooth operator - Efficient rotary vane motor provides high uniform torque for quick response, and smooth, quiet operation.
    • Easy to use - Handle-mounted pendant control for one-handed operation and load positioning.
    • Variable speeds - Precise and infinite speed control for accurate load spotting.
    • Wire rope design - Self-winding lifting cable stores conveniently inside unit.
    • Suspension - Swivel top and bottom hooks with hook latches standard, for portability and quick installation.
    • Disc brake - Secures load and eliminates drift when pendant is released.

    CM Apollo Wire Rope Hoists and Trolleys

    The Apollo compact wire rope hoist provides high hook lift with no design compromises. It lets you choose from the widest range of lifts, lifting speeds, clearances, mounting options and controls of any hoist on the market. It features:

    • Weston-type mechanical load brake and multiple disc motor brake
    • 2-20 ton capacity for wide range of lifting needs
    • Low headroom design
    • Double reduction reduced gearing provides smooth, quiet drive train
    • NEMA 4, 4x/12 enclosed push-button control
    • Made in U.S.A

    CM Polaris Wire Rope Hoists and Trolleys

    Rugged wire rope hoist with lift capacity up to five tons features:

    • Motor mounted disc brake
    • Hoist duty motor drive and gear train arrangement
    • Frame = welded steel, (2 sizes - short and long)
    • Brakes - multiple disc D.C. motor brake, and Weston style mechanical
    • Alloy aluminum gear case and cover
    • Made in U.S.A.

    Please contact Milwaukee Crane's expert staff for applications assistance for CM  Hoist products.

  • Shaw Box

    Shaw Box Hoists

    Shaw Box versatile high-performance wire rope hoists


    Shaw-Box wire rope hoists are ideally suited for virtually any lifting application. These modular, versatile hoists offer capacities from 1/2 to 100 tons, lifts from 12 to 259 feet, hoisting speeds from 8 to 56 feet per minute, and many control options. Components are available to build a wide variety of overhead cranes from 1/2 to 100 ton capacity, spans to 120 feet.  Electric or air-powered, indoor or outdoor duty, general or severe industrial service, for standard, corrosive or explosive environments Shaw-Box has the products to fit your overhead material handling requirements.


    Shaw Box World Series Wire Rope Hoist

    • 5, 7 1/2 & 10 ton models
    • Metric capacity rated
    • Low headroom design for maximum lift
    • Designed for H4 service minimum
    • Electrics to N.E.C. standards
    • 2-speed hoists & trolleys
    • NEMA 4/12 panel
    • 6:1 ratio on hoist, 3:1 on trolley, high to low speeds
    • Upper / lower geared limit switch
    • Upper block operated limit switch
    • Runs on beam flanges 4 5/8”- 20” wide; on beams to 2” thick
    • Hoist gearing in separate, easily accessible gear case

    World Series Hoist catalog in PDF (400 KB)

    World Series Trolley catalog in PDF (652 KB)


    Shaw Box Wire Rope Hoists

    • 1/2 to 25 ton capacity
    • Electric
    • Air Operated
    • Low Headroom
    • Spark Resistant
    • Explosion Proof

    Shaw Box Hoist catalog in PDF (1314 KB)


    Top- Running Trolleys

    • 5 to 100 ton capacity
    • Electric
    • Air Operated
    • Spark Resistant
    • Explosion Proof

    Shaw Box TR Trolley catalog in PDF (567 KB)


    Crane Components

    • Top-Running
    • Under-Running
    • Single Girder
    • Double Girder
    • Electric
    • Air Operated
    • Spark Resistant
    • Explosion Proof

    Shaw Box catalog in PDF (1011 KB)


    Please contact Milwaukee Crane for assistance with your Shaw Box questions and applications.

  • R & M Hoists

    R&M Hoists

    Spacemaster SX and Spacemaster EX Explosion Proof


    R&M SPACEMASTER� SX WIRE ROPE HOIST


    The R&M Spacemaster� SX represents a revolutionary new generation of exceptionally reliable electric wire rope hoists, featuring advanced technology and cutting-edge performance.


    An innovative design that includes a large drum diameter gives Spacemaster� SX wire rope hoists the lowest headrooms and best wheel loads in the industry, while providing near true vertical lift with single reeved hoists, and both exceptional hook approaches and heights of lift. Unique features included new low maintenance, sealed brakes; a two-speed hoist motor; and trolley inverter control. A NEMA 4 type control enclosure is also standard. Spacemaster� SX wire rope hoists are designed to meet and exceed either ASME H3 or ASME H4 duty (FEM 1Am, 2m, or 3m) ratings and provide the ultimate in easy load handling, safe operation and lasting, trouble-free performance.


    Standard configurations include normal headroom, low headroom and double girder trolley designs. Wire rope hoists in short ton ratings (ASME) or metric ratings (FEM) meet a wide variety of application requirements:


    • 1/2 - 75 ton (500 - 75,000 kg) capacities
    • Lifts starting at 13ft (4m) to 320ft (100m) and beyond
    • Lift speeds 10/1.5 - 62/10 fpm (3/0.5 - 19/3 m/min)
    • 208, 230, 460, 575/3/60 or 380/3/50 supply
    • Single reeved or double reeved

    EASE OF OPERATION


    Large-diameter hoist drum means easy positioning, closer approaches.

    The larger rope drum diameter provides nearly true vertical lift with a single reeved hoist — only 1/8" drift per foot of lift. The result is exceptionally smooth movement and fast load positioning. This innovative design also means a shorter frame length, allowing closer end approaches.


    Hoist and trolley motors designed for space savings and productivity.

    Standard two-speed hoist motor (6:1 ratio), designed specifically for hoisting applications, offers high starting torque and ensures precise and reliable load handling.


    This motor is class F insulated, 30 minute rated (60% effective duty), thermally protected and totally enclosed.


    The trolley motor's standard inverter control offers two-step or infinitely variable speed control for smooth acceleration and deceleration; minimal load swing; fast, efficient handling; and accurate load placement.


    R&M SPACEMASTER� EX HAZARDOUS LOCATION WIRE ROPE HOIST


    The Spacemaster EX is the hazardous location version of the industry leading Spacemaster SX hoist. An innovative design that includes a large drum diameter gives the Spacemaster EX hoists the lowest headrooms and best wheel loads in the industry, while providing near true vertical lift with single reeving, as well as exceptional hook approaches and heights of lift.


    STANDARD CONFIGURATION


    • Foot mount, low headroom, normal headroom and double girder
    • 1-1/2—20 ton [1600—20,000 kg] capacities
    • Lifts starting at 13ft [4m] to 324ft [99m] and beyond
    • Lift speeds 10/1.5—62/10 fpm [3/0.5—19/3 m/min.]
    • 460, 575/3/60 or 380/3/50 supply
    • ASME H3 or ASME H4 duty [FEM 1Am, 2m, or 3m] ratings
    • For Class I group C & D Division 2 Applications
    • Temperature classification is T3
    • Single reeved or double reeved

    STANDARD FEATURES


    • Two speed hoist with 6:1 ratio, contactor control
    • Hoist motor is class F insulated, 60% effective duty and thermally protected
    • Low maintenance, sealed hoist brake
    • Two speed trolley with 4:1 ratio, contactor control
    • Electro-mechanical load limit switch
    • 2-position hoist limit switch
    • IP55/NEMA 4 rated control panel
    • CSA C/US approved
    • Approx. 40:1 drum to rope diameter ratio for extended rope life
    • Rope guide with spring loaded pressure roller
    • Trolley motor with compact disc brake
    • Trolley bumpers
    • Mainline contactor
    • 115 Volt control transformer
    • Push-button assembly & pendant
    • Available options: bronze coated load hook; bronze trolley wheels

    Please contact Milwaukee Crane's expert staff for applications assistance for R&M  Hoist products.

  • Harrington Hoists

    Harrington Hoist

    High Duty Cycle Chain Hoists to 20 Tons Capacity


    Harrington Hoist

    NER/ER SINGLE SPEED HOOK SUSPENSION


    • Standard length of power supply cable is 15'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional canvas chain containers are available.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Lug mount available

    Harrington Hoists

    NERM/ERM SINGLE SPEED WITH SINGLE SPEED TROLLEY


    • Brakes on trolley motors are standard.
    • Standard length of power supply cable is 30'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord, or power supply cable are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Push button switches come in a standard 4-button type (Up/Down, Traverse) for monorails.
    • Additional control features available.
    • Shown with optional canvas chain container.

    Harrington Hoist

    NERG/ERG SINGLE SPEED WITH GEARED TROLLEY


    • Standard length of power supply cable is 15'. For more information, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Push button switches come in a standard 2-button type (Up/Down) for monorails.
    • Additional control features available.
    • Show with optional canvas chain container.

    Harrington Hoists

    NERP/ERP SINGLE SPEED WITH PUSH TROLLEY


    • Standard length of power supply cable is 15'. For more information, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Push button switches come in a standard 2-button type (Up/Down) for monorails.
    • Additional control features available.

    Harrington Hoist

    NER/ER DUAL SPEED HOOK SUSPENSION


    • Standard length of power supply cable is 15'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Shown with optional canvas chain container.
    • Lug mount available

    Harrington Hoists

    NERM/ERM DUAL SPEED WITH SINGLE SPEED MOTORIZED TROLLEY


    • Brakes on trolley motors are standard.
    • Standard length of power supply cable is 30'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Push button switches come in a standard 4-button type (Up, Down, Traverse) for monorails.
    • Additional control features available.

    Harrington Hoist

    NERM/ERM DUAL SPEED WITH DUAL SPEED MOTORIZED TROLLEY


    • Brakes on trolley motors are standard.
    • Standard length of power supply cable is 30'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • \Push button switches come in a standard 4-button type (Up/Down,Traverse) for monorails.
    • Additional control features available.
    • Optional canvas chain container shown.

    Harrington Hoist

    ERM LARGE CAPACITY 8T THROUGH 20T MOTORIZED TROLLEY


    • Brakes on trolley motors are standard.
    • Standard length of power supply cable is 30'. For more information on power supply system, contact the Harrington distributor nearest you.
    • Special lengths of load chain, push-button cord or power supply cables are available upon request.
    • Harrington load chain is case-hardened Grade 80 chain.
    • Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.
    • Push button switches come in a standard 4-button type (Up/Down, Traverse) for monorails.
    • Additional control features available.

    There are many other Harrington Hoist models and options available. Please contact Milwaukee Crane's expert staff for applications assistance for Harrington Hoist products.

  • P & H New Crane & Hoist Parts

    P&H Crane Replacement Parts

    P & H Crane Parts from Milwaukee Crane


    Milwaukee Crane has one of the largest stocks of P&H crane parts anywhere.


    • Immediate delivery from stock on most P&H parts
    • We ship P&H parts worldwide.

    Genuine P&H Crane Parts Available

    P & H Parts Available for Immediate Delivery


    Milwaukee Crane stocks genuine P&H crane replacement parts.  We have P & H replacement parts and components for most P & H cranes.  We are authorized distributors for P&H Cranes, Hoists and parts!


    We ship P&H parts worldwide.


    Note: We do sell parts for P & H mobile cranes. Please inquire.


    Don't see the P & H part you need?Please contact us for assistance.


    Click here to see frequently purchased P&H parts.

Genuine P&H Parts Available

1007Z375

SAFETY LATCH

100E1076-1

MAGNET ASSEMBLY

100E2397-2

PUSH BUTTON

1 SPEED

100E2504-1

SWITCH ASSEMBLY

100E2783-4

INTERLOCK

100E2783-6

INTERLOCK

100E4438-1

SWITCH

100E4537-2

PUSH BUTTON

5 SPEED

100E4538-2

PUSH BUTTON

2 SPEED

100E4966-3

BRAKE RECTIFIER

100E6558-1

INTERLOCK

100E695-7

LIMIT SWITCH ASSEMBLY

100F682-2

SWITCH

1014Z2805

COVER

1014Z3145

GEAR CASE ASSEMBLY

1016Z948

HANGER ANCHOR

1017Z1

SPRING

1018Z6333

SNAP RING

1010Z11231

ROD END

1045Z666

BRAKE REPAIR KIT

1045Z87

SPRING W/ CASE

1048Z22

SEAT CUSHION

1075Z1611

TRANSISTOR MODULE

1079Z1215

CONTACT KIT

1079Z1217

CONTACT

1079Z213

TIP

1079Z2159

CONTACT

1079Z4511

CONTACT KIT

1079Z4512

CONTACT KIT

1079Z4513

CONTACT KIT

SIZE 1-3/4

1079Z4519

CONTACT KIT

1079Z4522

CONTACT KIT

SIZE 2

1079Z4524

CONTACT KIT

1079Z4550

MOVABLE CONTACT

1079Z4551

STATIONARY CONTACT

1079Z4552

STATIONARY CONTACT

1079Z606

CONTACT

10F9079D1

SHAFT

13" SBE

10F9105D5

SHAFT

1100F2-2

SHAFT / FLANGE KIT

100H37-1

REPAIR KIT FOR 100J4109-1 HYDRAULIC CYLINDER

1100T179-1

SEAL REPAIR KIT

110E81F7

CONTACT BLOCK

13F1879D1

BRAKE WHEEL

10"

13Z333

WHEEL

13Z403

ROLLER

14H493

WASHER

14Q94

JUNCTION BOX

15F388

ROD

15F391C2

LINING

15F427

DISC PLATE

15F486

PIVOT LINK

15F518

DISC

15Q6

DISC

15Q87D1

FRICTION DISC

15Q91D1

BRAKE DISC

15Q93D1

FRICTION DISC

15U78D2

BRAKE

16Z119

SUPPORT

16Z509D1

BUMPER

17H124

SPRING

17H126

SPRING

17H128

SPRING

17H218

SPRING

17H281

SPRING

17H317

SPRING

17H327

SPRING

17H401

SPRING

17H451

SPRING

17Q22

SPRING

17Z103

SPRING

17Z140

SPRING

17Z147

SPRING

17Z161D1

SPRING

17Z165

SPRING

17Z174

SPRING

17Z183

SPRING

17Z222

SPRING

17Z286D13

SPRING WASHER

17Z286D14

WASHER

17Z286D15

SPRING WASHER

17Z286D17

WASHER

17Z286D20

SPRING WASHER

17Z286D46

WASHER

17Z294

SPRING

17Z397

SPRING

17Z403

SPRING

17Z548D1

SPRING W/ PLATE

17Z548D2

SPRING W/ PLATE

17Z548D3

SPRING W/ PLATE

17Z548D5

SPRING W/ PLATE

17Z652

SPRING

17Z760

SPRING

17Z797

SPRING

17Z888

COMPRESSION SPRING

17Z942

SPRING

17Z944

SPRING

18F1825

SPACER

18F1866D1

SPACER

16" SBE BRAKE

18F1866D2

SPACER

18F1866D3

SPACER ARMATURE

19" SBE BRAKE

20F315

BRAKE ROD

20H4195

BRAKE STUD

278F1559D1

SHOE

301F1037F2

SHAFT

D FRAME

301F1068C1

PINION

301F1069C1

PINION

301F1233

PINON GEAR

301F1375

PINION

301F1423

PINION GEAR

301F1448

PINION

301F1527F1

SHAFT

301F298F1

PINION ASSEMBLY

301F288F1

PINION ASSEMBLY

301F829

GEAR

301F888D2C1

DRUM GEAR

301F889F2

SHAFT

301H569

GEAR

301H588

INTERMEDIATE PINION

301H595

PINION

307F228C1

SHEAVE

307F229C1

SHEAVE

307F236

SHEAVE

307F91

SHEAVE

307H54C1

SHEAVE

301F1124F1

HOOK

308F1127F1

HOOK ASSEMBLY

308F1136F0

HOOK ASSEMBLY

308F1144

HOOK

308F564

HOOK

308F724F1

HOOK

308F868F1

HOOK ASSEMBLY

30Z120F1

CABLE ASSEMBLY

30Z120F2

CABLE

30Z120F4

CABLE

30Z121F2

CABLE ASSEMBLY

30Z140F2

CABLE

3100E771-1

BRAKE

3100F686-8

GEAR CASE

310H277F1

SHAFT ASSEMBLY

310H508F1

SHAFT

313F1151

RATCHET ASSEMBLY

313F1161

RATCHET ASSEMBLY

313F352

HUB

313F488

HUB

313F596

HUB

313F665

HUB

313F799

HUB

313F907

TRUCK WHEEL IDLER

314A141

GEAR CASE

314F356

COVER

314F626

COVER

315F133

PLATE

315F134

PLATE

315F136

PLATE

315F138

PLATE

315F140

DISC PLATE

315F193

DISC

315F196

FRICTION DISC

315F198

FRICTION DISC

315F200

FRICTION DISC

315F27D2

DISC PLATE

315F74C2

DISC

318F1897F2

COUPLING

318F1898F2

COUPLING

318F1900F2

COUPLING

318F1901F2

COUPLING

318H1880C1

COUPLING

318H1900C1

COUPLING

318H1909C1

COUPLING

318H1925C1

COUPLING

318H1926C1F1

COUPLING

318H1964

DRUM SLEAVE

318H2000

DRUM SLEAVE

318H2040

DRUM SLEAVE

6100E429F1

BOTTOM BLOCK ASSEMBLY

6988E401-5

MOTOR

73Q5

BRUSH HOLDER

73Q6

BRUSH HOLDER

73Q7

BRUSH HOLDER

73Q8

BRUSH HOLDER

75Q336D1

TRANSFORMER

75Z1091D1

RECTIFIER

75Z23D1

TRANSFORMER

75Z331D1

RECTIFIER

75Z456D3

RECTIFIER

75Z514D1

TRANSFORMER

75Z578D1

RECTIFIER

75Z578D4

RECTIFIER

75Z57D1

TRANSFORMER

75Z590D13

DIODE

78F247F1

WHEEL

78F294

SHOE

78H237

INSULATOR

78H243

BRACKET

79F1435C1

SHIELD

79H1042C1

ARC SHIELD

79H1043C1

ARC SHIELD

79H1125

CONTACT

79H1356

CONTACT SUPPORT

79H1456D1

CONTACT STATIONARY

79H1457D1

CONTACT

79H1458

INSULATOR

79H1586D2

CONTACT

79H1606

CONTACT

79H1607

CONTACT

79H1683

TIP

79H1684

TIP

79H1833

TERMINAL BAR

79H1922

CONTACT

79H2017C1

SWITCH

79H2171

TIP

79H2181

TIP

79H583

INSULATOR

79H618

BAR

79H734

CONTACT TIP

79Q1050D5

CONTACT BLOCK

79Q1050D7

CONTACT BLOCK

79Q1051D3

RELAY

79Q1052D1

CONTACTOR

79Q1056D1

RELAY

79Q1057D4

CONTACTOR

79Q638

CONTACTOR

79R453D501

FUSE

79U10D2

MODULE

79U2485D1

BRAKING MODULE

79U2488D2

INTERFACE BOARD

79U6D3

MODULE

79Z1738D2

CABLE GUIDE

79Z2475D1

NETWORK

79Z264D20

TIMER

79Z3145

CONTACT TIP

79Z3253D2

RELAY

79Z3293

LIMIT SWITCH

79Z602D1

HOOD, BLACK

79Z602D2

HOOD, GREEN

79Z602D3

HOOD, RED

79Z602D4

HOOD, ORANGE

79Z602D5

HOOD, YELLOW

79Z602D2

HOOD, BLUE

79Z95D5

FUSE

79Z994D4

RELAY

80F386D4

SEGMENT

80F387D13

SEGMENT

80F387D14

SEGMENT

80F387D2

SEGMENT

80F387D3

SEGMENT

80F387D4

SEGMENT

80H679

POCKET

80H681

CAM

80H682

CAM

80H684

CAM

80H961

CONTACT

80Q35D5

VARISTOR

80Z117

SCREW

815E1601

ARMATURE PLATE

815E1608

DISC

818H1447

BUSHING

819H67D37

DRIVE LOCK PIN

81A55

ARMATURE

81 E44

ARMATURE

81E83D1

ARMATURE PLATE

81F82C1

ARMATURE

81H109

CLAMP

81H115

CLAMP

81H13

CLAMP

81H50

CLAMP

81H59

CLAMP

820F1517

BRAKE STUD

820H1601D1

GASKET

85Z24D8

CORD GRIP

87H43

COVER

87Z23

RECEPTACLE

88Z390D10

MOTOR

8Z388D3

LATCH KIT

8Z388D5

LATCH KIT

8Z388D6

LATCH KIT

8Z64D17

LATCH KIT

8Z64D21

LATCH KIT

8Z64D25

LATCH KIT

8Z64D27

SAFETY LATCH

8Z64D3

LATCH KIT

8Z64 D7

LATCH KIT

8Z64D9

LATCH KIT

9085-1

SHUNT

914F85-3

TOP COVER ASSEMBLY 6 HOLE P.B.

914F85-4

FRONT COVER 8 HOLE P.B.

914F86-4

BACK COVER 8 HOLE P.B.

915F71-1

BRAKE SHOE

915F73-1

BRAKE SHOE

915F84-1

BRAKE SHOE

915F84-4

BRAKE SHOE

9308F115-28

CABLE

9308F32-33

CABLE

9308F41-1

CABLE

9308H112-1

CABLE

9308H112-2

CABLE

9308H129-1

CABLE

9308H129-2

CABLE

9308H168-1

CABLE

9308H174-1

CABLE

9308H48-5

CABLE

9310F102-4

DRUM PINION LEFT HAND

9310F122-4

DRUM PINION LEFT HAND

9310F123

DRUM PINION

9318H31-1

SPRING

9318HH31-2

SPRING

9318H31-4

SPRING

9325H48-1

BEARING ASSEMBLY

9398-1

SUPPORT

9601E410F1

LIMIT SWITCH ASSEMBLY

9601E410F2

SWITCH DRIVE SHAFT ASSEMBLY

9679F401-1

LIMIT SWITCH ASSEMBLY

9681E402F1

BRAKE SOLENOID & PLATE

973F83-1

BRUSH HOLDER ASSEMBLY

973F91-3

BRUSH HOLDER ASSEMBLY

975E47-12

POT ASSEMBLY

975E632-2

COIL

979E269-1

ARC SHIELD

979H101-1

CONTACT

979H99-1

CONTACT

981A6-4

POT ASSEMBLY

981A7-4

POT ASSEMBLY

981E48-2

POT ASSEMBLY

9314E91-1

GEAR CASE COVER

E FRAME

9314E98-1

GEAR CASE COVER

D FRAME

981A5-10

MAGNETIC POT ASSEMBLY 100 VOLT

CD-5

981A5-2

MAGNETIC POT ASSEMBLY 18 VOLT

CD-5

F386D3

SEGMENT

F387D4

SEGMENT

R24286 D1

BRAKE DISC

HEVI-LIFT HOIST

R24288 D1

BRAKE DISC

HEVI-LIFT HOIST

SURPLUS MOTORS

MOTOR

7-1/2 HP 1145 RPM P&H WOUND ROTOR MOTOR  230/460 VOLT HEW 324 FRAME TENV

MOTOR

10 HP P&H 1750 RPM SINGLE SPEED HOIST MOTOR 230/460 VOLT FRAME S250 UY TYPE SCTA SINGLE BEARING W/ SPLINED OUT PUT SHAFT FLANGE MOUNT TO FIT HEVI-LIFT HOIST

MOTOR

20 HP 1145 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 326X FRAME TENV

MOTOR

25 TON 1710 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 324 ROUND FRAME SINGLE BEARING W/ SPLINED OUTPUT SHAFT FLANGE MOUNT TO FIT HEVI-LIFT HOIST

 
MOTOR 40 HP 1750 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 365X FRAME TENV  
MOTOR 25 HP 1710 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 324 FRAME TENV  
MOTOR 60 HP 1130 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 365 XL  
MOTOR 75 HP 1150 RPM P&H WOUND ROTOR MOTOR 230/460 VOLT HEW 444 X TENV  
     
  • Ace Worldwide

    Ace Heavy Duty Hoists

    Standard or Custom Designed Wire Rope Hoists from Ace


    Ace manufactures heavy duty wire rope hoists for a broad range of applications in any combination through 550 tons and CMMA Class F.


    Special applications include:


    Hazardous Locations

    Hot Metal

    Low Headroom

    Polar Hoists

    Twin Drum Bucket

    Critical Lift Applications

    Magnet Applications

    Motorized Lifting Beams

    Motorized Hook Blocks

    Bucket Hoists

    Twin Drum

    Transfer Cars


    Ace Hoist Design Features


    Ace Hoist Limit Switches

    Rotary geared control circuit, upper and lower limit switch, automatically de-energizing hoist drive at field set extremities of hook travel, plus a weight-operated control circuit upper limit switch.


    Ace Hoist Motor

    Foot-mounted, totally enclosed, 60-minute Class H minimum insulation.  Directly connected to hoist reducer via gear coupling.


    Ace Trolley Drive

    Continuous duty, Class F motor with DC disc brake and helical gear reducer mounted on axle.


    Ace Trolley Wheels

    Precision, 1060 steel, double flange with hardened treads and flanges to 320 Brinell.  Double spherical, roller-type bearings in modified MCB capsules.


    Ace Drum

    Fabricated steel all-welded construction, supported on anti-friction bearings and furnished complete with left and right hand grooving for a true vertical plumb hook lift


    Ace Hoist Electric Brake

    Foot-mounted, self aligning floating shoe, 150% minimum, torque-rated, shoe-type electric motor brake.  Brake wheel is mounted on reducer input shaft.


    Ace Trolley Frame

    Fabricated steel, all-welded frame, precision bored to ensure consistent true tracking cross bridge operation.  Heavy ribbed plate decking provides support of main Hoist-Trolley components.  Upper sheave nest is serviceable from top side of main machinery deck.  Rubber bumpers included on all four corners of trolley.


    Ace Hook Block

    All fabricated, steel enclosed housing for maximum safety, with high carbon steel heat-treated 320 Brinell sheaves and roller bearings, forged steel hook with latch


    Ace Hoist Gear Reducer

    Fabricated steel, horizontally-split housing with through heat-treated (40-45 Rc) alloy steel gearing and roller type bearing mounted in cartridges.  Weston type mechanical load brake up to 50 hp.  Ace family of reducers vary from 30 to 1500 hp.

The standard features and LOW COST OF OWNERSHIP makes The Eliminator an exceptional value!

Cranes

  • Milwaukee Crane

    Electrification Products for Cranes

    Milwaukee Crane has the right electrification product for you


    Milwaukee Crane has world class crane and hoist electrification systems for new crane systems, crane rebuilds, crane retrofits and crane service.


    The most frequently installed and serviced types of electrification are:

    • Crane Bridge
    • Cable Reel
    • Shielded Bar
    • Festoon Cable


    • Monorail and Runway
    • Cable Reel
    • Shielded Bar
    • Festoon Cable

    Milwaukee Crane offers these fine product lines for your electrification needs:


    • Duct-O-Wire
    • Electromotive
    • Insul-8

    You can view detailed information at the above links.


    Please contact Milwaukee Crane's expert staff for applications assistance with electrification products.


    Milwaukee Crane Runway Systems

    Runways for every crane application


    Milwaukee Crane designs, fabricates and installs all standard types of crane runways as well as custom configurations:


    Typical runway systems include:


    • Top-Running Crane Runways
    • Under-Running Crane Runways
    • Patented Track Runways
    • Enclosed Track Runways

    All of the above runway systems can be installed in any of the following ways:


    • Building Column Supported
    • Floor Supported (tied back into building columns)
    • Freestanding
    • Ceiling Supported for light capacity ergonomic cranes

    Contact Milwaukee Crane for assistance with your runway requirements.

  • Gorbel Work Station Cranes

    Enclosed Track Design


    Gorbel Work Station Crane Systems utilize enclosed track that is high in strength and low in weight.


    • Available in steel, stainless steel, and aluminum.
    • Enclosed track cranes are up to three times easier to move than traditional bridge cranes.
    • The design virtually eliminates dirt and dust from the rolling surface. This reduces wear on the wheels of the trolley and end trucks.
    • The smooth running surface reduces rolling resistance.
    • The low profile of the steel track allows the system to be installed where headroom is a problem.
    • The low track weight reduces the applied forces exerted on the supporting structure. Long spans allow systems to be installed where hanging points are infrequent.
    • Five capacities (250 lb., 500 lb., 1,000 lb., 2,000 lb., and 4,000 lb.) enable you to keep bridge weights and costs to a minimum.

    The 2� taper of the running flange helps to center the trolley in the track for smooth, effortless movement of trolleys and end trucks.


    Work Station Cranes Free Standing


    Gorbel Free Standing Work Station Bridge Cranes can handle the toughest overhead lifting tasks. These cranes, which can be installed on any normal 6-inch reinforced concrete floor, feature a pre-engineered, modular design that can easily expand as your work centers expand.


    • Available in steel, aluminum, and stainless steel.
    • Range in capacities from 250 lb. to 4000 lb., with spans up to 30 feet.
    • Easy to install, relocate, and expand.
    • Provide ease of movement and positioning.
    • Doesn't put stress on the building's overhead structure.
    • Requires a reinforced concrete floor of at least 6 inches.

    Work Station Cranes Ceiling Mounted


    When a work area must be free from any support structures that may interfere with operations, ceiling mounted bridge cranes are an excellent solution to keeping floors clear.  Handling capacities up to 4000 lbs. with overall bridge lengths up to 34 ft., these systems are pre-engineered and modularly designed for easy installation, expansion, and relocation.  Customers can install multiple bridges along one set of runways and greatly increase their productivity.


    • Available in steel, aluminum, and stainless steel.
    • Capacities from 250 lb. to 4000 lb., with spans up to 30 feet.
    • Easy to install, move, and position.
    • Support steel doesn't interfere with the handling operation.
    • Require buildings with adequate overhead structures.

    Work Station Cranes Monorails


    • Provide a solution for true linear movement.
    • Pre-engineered modular designs enable Gorbel Work Station Crane Systems to be adapted for more sophisticated applications. This is done by the addition of extra tracks, curves, switches, and interlocks (transfers)

    Monorail Curve


    The monorail curve is a section of track that is formed to provide a 90� bend. Curve sections have a straight area that projects beyond the curve. The curve needs to be supported with three hangers. 


    Work Station Cranes Seismic Zone IV


    Gorbel's Seismic Zone IV Cranes have been designed for the most rigorous applications in areas that must adhere to Seismic Zone IV building code requirements.  These cranes are completely free standing and require no sway bracing.  The pre-engineered modular kit design of Gorbel's Seismic Zone crane systems provide easy expansion or relocation.


    • Designed for Seismic Zone IV.
    • Capacities from 150 lb. to 4000 lb., with spans up to 30 feet.
    • Easy movement for increased productivity.
    • Steel and Aluminum enclosed track.

    Workstation Jib Cranes Free Standing


    Work Station Jib Cranes are the ideal substitute for traditional, heavy I-Beam Jib Cranes.  These jibs are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and hoists.  When floor mounted, they can accommodate up to a 360orotation.  Capacities are available from 100 lbs. to 1000 lbs. with spans up to 16 feet.

    • Capacities from 100 lb. to 1000 lb., with spans up to 16 ft.
    • Offer 360� rotation.
    • Most can be bolted directly to existing floor without adding special foundations.
    • Utilize enclosed track for the boom assembly, which reduces dead weight for easier rotation than traditional I-beam jibs.
    • Feature a retaining pin through the pivot pin to help resist accidental upward dislodgment of the boom assembly.
    • Include hoist trolley.
    • Roller bearings provide for unsurpassed ease of movement.

    Workstation Jib Cranes Wall Cantilever


    Work Station Jib Cranes are the ideal substitute for traditional, heavy I-Beam Jib Cranes.  These jibs are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and hoists.  When column or wall mounted, they can handle up to a 200orotation.  Capacities are available from 100 lbs. to 1000 lbs. with spans up to 16 feet.

    Capacities from 100 lb. to 1000 lb., with spans up to 16 ft.


    • Available in steel (all capacities) or stainless steel (capacities to 500 lb.).
    • Offer 200� rotation.
    • Can be wall or column mounted.
    • Utilize enclosed track for the boom assembly, which reduces dead weight for easier rotation than traditional I-beam jibs.
    • Use tapered roller bearings at the pivot points for unsurpassed ease of rotation.

    Workstation Jib Cranes Aluminum Tie Rod


    The AL100 Wall Bracket Work Station Jib Crane utilizes Gorbel's patented light-weight, high strength extruded aluminum enclosed track.  This revolutionary track reduces the rotational dead weight of the boom by 56% to 68%, making the jib up to 40% easier to rotate than comparable I-beam jibs.  The tie rod design minimizes deflection and is more precise when positioning loads than other jibs.


    • Wall mounted or column mounted
    • Available in capacites from 150-2000 lbs. and spans up to 20 feet. (not available for 2000 lbs.)
    • Utilizes Gorbel's patented light weight, high-strength extruded enclosed track on the boom.
    • Weighs up to 355 lbs.
    • Rotates up to 40% easier than a traditional I-Beam Jib
    • Less deflection for easier load control and positioning

    Articulating Jib Cranes Free Standing


    This versatile crane can move loads around corners, reach into machines or doorways, and swing under obstructions.  This crane is perfect in applications that require an operator to rotate the jib in close to the pivot point.  Capacities from 150 lbs. to 2000 lbs. with spans up to 16 ft.


    • Floor mounted for easy installation/relocation
    • Available in capacities from 150-2000 lbs. and spans up to 16 ft.
    • 360� rotation at both pivot points (optional)
    • Suited for applications where loads need to be positioned around obstructions, through doorways, or close to a free standing mast or building column.
    • Effortless rotation
    • Can be used with hook mounted lifting devices (electric, air or vacuum)

    Articulating Jib Cranes Ceiling Mounted


    This versatile crane can move loads around corners, reach into machines or doorways, and swing under obstructions.  This crane is perfect in applications that require an operator to rotate the jib in close to the pivot point.  Capacities from 150 lbs. to 2000 lbs. with spans up to 16 ft.


    • Ceiling mounted for a clear work area with no floor obstructions
    • Available in capacities from 150-2000 lbs. and spans up to 16 ft.
    • 360� at both pivot points (optional)
    • Can be mounted to a platform supported from a Gorbel Work Station Bridge Crane to allow the jib to swing under an obstruction or outside the normal coverage of a bridge crane
    • Platform mounting can deliver the benefits or an articulating jib to multiple work cells
    • Effortless rotation
    • Can be used with hook mounted lifting devices (electric, air, or vacuum)

    Articulating Jib Cranes Wall/Column Mounted


    This versatile crane can move loads around corners, reach into machines or doorways, and swing under obstructions.  This crane is perfect in applications that require an operator to rotate the jib in close to the pivot point.  Capacities from 150 lbs. to 2000 lbs. with spans up to 16 ft.


    • Wall mounted or column mounted
    • Available in capacities from 150-2000 lbs. and spans up to 16 ft.
    • 200� rotation on primary boom.
    • Suited for applications where maneuvering around obstacles or swinging under obstructions is necessary
    • Easy Rotation
    • Easy Installation

    I-Beam Jib Cranes Free Standing


    Gorbel's I-beam Jibs are ideal for heavier loads from 1 to 5 tons (heavier capacities available, contact the factory).  They are also available in motorized or manual rotation.


    • Floor-mounted or insert style.
    • Capacities from 1/4 ton to 5 tons, with spans up to 20 feet.
    • Versatile cranes well-suited for use beneath traveling cranes, in open areas where they serve several work areas, in outdoor applications such as loading docks, and in machining and assembly operations.
    • Utilize I-beam boom assemblies for heavier capacities and longer spans.

    I-Beam Jib Cranes Wall Cantilever


    Gorbel's I-beam Jibs are ideal for heavier loads from 1 to 5 tons (heavier capacities available, contact the factory).  They are also available in motorized or manual rotation.


    • Used instead of a wall bracket jib crane when headroom is at a premium.
    • Provide hoist coverage for individual use in bays, along walls or columns, and as supplements to an overhead crane or monorail system.
    • Capacities from 1/4 ton to 5 tons, with spans up to 20 feet.
    • Utilize I-beam boom assemblies for heavier capacities and longer spans.

    I-Beam Jib Cranes Wall Bracket


    Gorbel's I-beam Jibs are ideal for heavier loads from 1 to 5 tons (heavier capacities available, contact the factory).  They are also available in motorized or manual rotation.


    • Economically provide hoist coverage for individual use in bays, along walls or columns, or as supplements to an overhead crane or monorail system.
    • Capacities from 1/4 ton to 5 tons, with spans up to 30 ft.
    • Require a structurally adequate wall or column to support the jib.
    • Require sufficient clearance above the boom throughout its arc to accommodate the tie rod suspension.
    • Utilize I-beam boom assemblies for heavier capacities and longer spans.

    I-Beam Jib Cranes Mast Type


    Gorbel's I-beam Jibs are ideal for heavier loads from 1 to 5 tons (heavier capacities available, contact Milwaukee Crane).  They are also available in motorized or manual rotation.


    • Provide for dramatically reduced forces to supporting structures.
    • Floor-supported, top-stabilized cranes capable of 360� rotation via a top and bottom bearing assembly.
    • Typically do not require special foundations.
    • Capacities from 1/4 ton to 5 tons, with heights up to 20 ft. and spans up to 20 ft.
    • Full Cantilever and Drop Cantilever styles.
    • Utilize I-beam boom assemblies for heavier capacities and longer spans.

    I-Beam Jib Cranes Motorized


    • Available as Free Standing, Wall Cantilever, Wall Bracket, and Mast Type series.
    • The Retrofit Traction Drive Kit will fit any manufacturer's free-standing jibs with box style head assembly. The kit makes it possible to update an existing free-standing jib crane with motorized power as a cost-effective way to solve workers' compensation or safety problems.
    • Utilize I-beam boom assemblies for heavier capacities and longer spans.


    Contact Milwaukee Crane for more information and pricing.


    Steel Gantry Cranes Fixed Height


    Gorbel's Fixed Height Steel Gantry Cranes provide an economical way to lift materials anywhere in a facility. Gorbel's heavy duty end frame design with square tubing uprights, knee braces and channel base provides stable lifting and movement.


    • Capacities from 1 to 5 Ton, with spans up to 30' and HUB's to 20'.
    • The non-marking durable polyurethane casters provide low rolling resistance for easy movement.
    • Bolted beam to upright connection to ensure that beam does not dislodge.
    • Pre-engineered for use with powered hoists.


    Options:


    • Four position swivel locking casters
    • V-groove casters for track mounted cranes
    • Steel casters
    • Casters with wheel brakes

    Steel Gantry Cranes Adjustable Height


    Gorbel's Adjustable Steel Gantry Crane provides the most flexible lifting solution of any style jib crane. The adjustable gantry can be moved to almost any location and can be easily adjusted to provide different lifting heights.


    • Capacities from 1 to 5 Ton, with spans up to 30' and HUB's to 20'.
    • All bolted connections between the beam and uprights

    Options:


    • Four position swivel locking casters
    • V-groove casters for track mounted cranes
    • Steel casters
    • Casters with wheel brakes
  • TC American Patent Track

    TC American Patented Track Monorails & Cranes


    Twin Cities Monorail is now TC American

    Monorail systems are commonly used in manufacturing and warehousing of items. Monorails can be used to bring products through the entire manufacturing process without the need for it to ever touch the ground. Systems can be as simple as a traveling hoist, or as complex as a custom engineered crane. Monorails have the advantage over ground based systems in that they take up no floor space allowing you the most productivity from every square foot of your facility. Monorail opens a whole new world of possibility to the savvy plant manager.


    Patented Track and Monorail Components


    200 Series 2.00" Rail:

    These light capacity cranes and monorails easily handle loads up to two tons. They offer the ultimate in flexibility, versatility, and economy. The 200 Series cranes and monorails deliver maximum strength and minimum roll resistance. They can be hand propelled, gravity or motor driven.  


    325 Series 3.25" Rail:

    The demands of industry for a broad line of hard working material handling equipment is the basis behind our 325 Series. It's complete, versatile, and expandable. It's the right move for transporting and positioning loads to 20 tons or greater. The 325 series rail systems are now also available on the Spanmaster� Work Center Cranes.  


    400 Series 4.00" Rail:

    The 400 Series is equally balanced between weight and strength.  The 400 Series equipment can be configured to meet any complicated track layout. The 400 Series is compatible with most older 4" systems.


    450 Series 4.50" Rail:

    Extra heavy loads, extra duty cycles and extra long spans require the 450 Series. Structurally engineered to assure practical overhead materials handling, the 450 Series is capable of moving loads up to 40 tons.  


    Trolleys:

    The design of the TC/American trolley utilizes a hanger system that allows for a small amount of movement reducing stress on the trolley wheels increasing the life of the trolley and rail while improving the overall smoothness of the movement. 


    Drives:

    TC/American manufactures a wide variety of electrically powered drives to help transport loads on monorail systems. Drives use hardened steel wheels, heavy duty gearing and motors providing years of dependable service with minimal maintenance.  


    Interlocks:

    TC/American crane and monorail systems can be joined end to end through the use of interlocks. This gives you the ability to transfer loads from one system to another without the need to change from one hoist to another. 


    Cranes:

    TC/American has the ability to manufacture a wide variety of overhead cranes. Our cranes use the same Patented Track technology that our monorail systems use ensuring serviceability and long life. 


    Curves:

    TC/American can bend the Patented Track rail into a curved section allowing your system to travel unobstructed around corners and curves without any need to transfer loads.  


    Switches:

    Switches allow the option of switching trolleys, tractors and hoists between two or three different lines on a monorail system. This eliminated the need to transfer loads from one hoist to another in the transport process.  


    Please contact Milwaukee Crane's expert staff for applications assistance for TC American monorail crane syystems.


    TC American 200 Series Monorail Components


    The 200 Series is the lightest weight and most versatile of the monorails. The 200 Series rail is a bolted two piece design with a lower rail width of 2 inches. This design allows for easy installation and modification. The 200 Series Rail is also available in a girder rail design. By adding this backbone to the rail it enables it to handle heavier loads and requires fewer supports so that it can span greater distances.  


    The 200 Series Monorail can be formed into curves on site allowing you to route the rail nearly anywhere you desire. A system of Switches and Interlocks can be added to the rail to allow you to interconnect your rail systems for the easy movement of goods from one station or department to another. This system eliminates the need to set items on the ground because one hoist can travel from station to station while under load.  


    Two Four and Eight Wheel Articulating Trolleys with drop forged wheels ensures you can handle loads ranging from 250 to 5600 lbs. These trolleys utilize a heavy structural load bar that rides under rail on trolley yokes allowing the trolley to swivel and articulate freely. A series of cranes can be fitted to your 200 series system that are available in hand push, hand chain, air or electrically operated design.  


    TC American 325 Series Monorail Components


    The demands of industry for a broad line of hard working material handling equipment is the basis behind our 325 Series. Its complete, versatile, and expandable, the right move for transporting and positioning loads up to 20 tons or more.  


    325 Series Rail is a three part Patented Track fabrication consisting of a high carbon manganese steel rolled T-section, an A36 steel web plate and top flange. These three parts are fused together during our state of the art welding process resulting in uniform rail that is straight and true from section to section. The rail is available in a range of sizes from 8 � to 40 inches deep depending upon your needs.


    A system of interlocks and switches keeps you on track while transferring from one rail system to another. This system of interlocks and switches facilitates the easy transfer from one station to another without the need to switch carriers.


    Any number of cranes can be mounted to your rail system Single and double girder, truss, or have a specialty crane designed for your specific application.  


    The 325 Series rail can be electrified through the use of TC/American's shielded conductor bars attached to the rail. These vinyl covered conductor bars offer safety, excellent conductivity and long wear.  


    Drive Units for the 325 Series are high torque heavy duty assemblies for hoist, carrier and crane drives. Drive motors range in power from 1/2 hp to 5 hp. Single, dual or variable speed drive systems are also available with speed ranges from 28 FPM to 600 FPM in AC or DC configuration.  


    The 325 series precision made articulating trolleys and wheels are designed for long service life and maximum rolling efficiency. Wheels are drop forged and ride on regreaseable or prelubricated sealed bearings. Wheel treads are induction hardened, providing years of outstanding service. Trolley yokes are adaptable to nearly any industrial application and built to handle years of service.  


    The 325 Series with the Patented Track design is also available in the Spanmaster� Work Station Crane design. Spanmaster� systems are versatile and can be either building-supporting or self-supporting.  


    TC American 400 Series Monorail Components


    Used to replace, and complement existing systems. It is also used in new installations. The 400 Series is designed around a 3 piece welded design. 400 series systems transport loads up to 10 tons. Equally balanced between weight and strength, 400 series equipment can be flexibly applied to meet any complicated track layout.


    The 400 series can be bent to create a wide variety of curves or connected to a series of switches to help you position your loads where you need them without the need to switch trolleys.  


    Like all TC/American monorail, a variety of trolleys are available for use on the 400 series rail. These heavy duty articulating trolleys are available with either flanged or flangeless wheels. Flangeless wheels in combination with side rollers reduce wheel friction to a minimum keeping the trolley in perfect alignment for high speed travel minimizing wear to track flanges on straight or curved sections.


    Monotractors can be added to move loads of up to 10 tons with ease using precision hardened, duty rated helical gears running in oil to power a 12" solid rubber tire. These are operated by push button or radio control.


    Pneumatic and electrical service can be added to power hoists and accessories eliminating hanging cords and hoses.  


    TC American 450 Series Monorail Components


    Extra-heavy loads, duty cycles and extra long spans require the TC/American 450 Series Cranes and Monorails. Structurally engineered to assure practical overhead material handling, the 450 Series is capable of moving loads of 40 tons or more.


    The rail is a Patented Track, three part fabrication, similar to the 325 series rail. However, the high carbon manganese steel rolled T-section has a tread size of 4 � inches wide and 1 1/8 inches thick! This gives the 450 series high wear resistance, and long tread life.  


    The 450 Series precision made articulating trolleys and wheels are designed for long service life and maximum rolling efficiency. Wheels are drop forged and ride on regreaseable or prelubricated sealed bearings, and wheel treads are induction hardened providing outstanding service over the years. Trolley yokes are adaptable to nearly any industrial application and built to handle years of service.


    Track switches offer a standard 10 ton capacity glide switch that are power or chain operated. Although engineered and built for extra heavy-duty applications, switches are compact, requiring minimum headroom.  


    The 450 Series drive unit is specifically designed for heavy-duty crane drive and monorail applications. Machined drop forged steel 9" trolley wheels have hardened treads and guide rollers for added endurance and stability. Single, dual, and variable speeds from 35 FPM to 600 FPM are available from 1 � to 5 HP. AC and DC configurations are available.


    Single and double girder cranes with 4 and 8 wheel end trucks are standard. Wheel bases extend from 72" to 108", depending upon capacity. All cranes are custom engineered and fabricated to the job requirements.  

Components

Reuland
Marathon
Baldor

ELECTRIFICATION

  • Electromotive

    Electrification Products for Cranes

    Milwaukee Crane has the right electrification product for you


    Milwaukee Crane has world class crane and hoist electrification systems for new crane systems, crane rebuilds, crane retrofits and crane service.


    The most frequently installed and serviced types of electrification are:

    • Crane Bridge
    • Cable Reel
    • Shielded Bar
    • Festoon Cable

    • Monorail and Runway
    • Cable Reel
    • Shielded Bar
    • Festoon Cable

    Milwaukee Crane offers these fine product lines for your electrification needs:

    You can view detailed information at the above links.


    Please contact Milwaukee Crane's expert staff for applications assistance with electrification products.


    Electromotive Crane Components

    Crane Controls, Electrification, Inverter Drives and More


    Electromotive Systems, a Magnetek company, is the world's leading designer and manufacturer of electrification and control products for the overhead material handling industry.

    • Electromotive Systems IMPULSE� Series crane controls have a proven track record of providing unmatched performance and reliability to the overhead material handling industry.
    • Electrification Electromotive Systems is an industry leader in providing precision electrification products for overhead material handling equipment.
    • Engineered Systems Electromotive Systems offers a broad range of control, application & system solutions for overhead material handling.
    • Contract Services Electromotive contract services offer the facilities and know-how to cost-effectively manufacture control systems to meet your exact specifications.

    See more information on

    Electromotive products:


    Motion Controls

    A combination of extensive application experience and leading-edge products provides the ultimate solution for overhead motion control.


    Remote Radio Controls

    PulseStar� Remote Radio Controls set a whole new standard in radio remote crane controls.


    Electrification

    Electromotive Systems is an industry leader in providing precision electrification products for overhead material handling equipment.


    Please contact Milwaukee Crane's expert staff for applications assistance with Electromotive products, Engineered Systems and Contract Services.


    Motion Controls


    IMPULSE� AC Crane Controls

    Electromotive Systems IMPULSE� Series crane controls have a proven track record of providing unmatched performance and reliability to the overhead material handling industry.


    OmniPulse™ DC Digital Crane Controls

    Electromotive Systems introduces OmniPulse Digital Crane Controls, the only microprocess controlled DC drive designed to work specific with a DC power input source.


    MAC™•2000

    Electromotive Systems introduces MAC™•2000, a reduced voltage soft start for applications needing cost-efficient motor control.


    TCONTROLS�

    TCONTROLS� Complete Crane Control Panels feature all the components needed to provide complete motor control for bridge, trolley, hoisting or combined overhead crane motions.


    ReFlx™

    The Electromotive Systems' ReFlx™ 120 and 120 "Plus" distance detection and collision avoidance systems are designed with reliability and economy in mind.


    Motors

    Electromotive Systems' inverter duty motors have been designed to meet the demands of crane/hoist applications, where premium construction and performance are a must.


    Radio Controls


    PulseStar� Systems

    Electromotive Systems has achieved a whole new level of performance, reliability and value with our technologically advanced line of PulseStar� Remote Crane Controls.


    Transmitters

    Lightweight, durable transmitters for PulseStar� Remote Crane Controls.


    Electrification


    Electromotive Festoon Systems and Cable

    ELECTROMOTIVE™ Festoon Systems and Cable provide an efficient method of delivering power and control to overhead material handling equipment.   


    SBP Pendant Pushbutton Stations

    Electromotive Systems' SBP� Pendant Pushbutton Stations provide optimum control and performance with less effort and fatigue than traditional pendants.


    SBP2 Pendant Push-button Stations

    The new Electromotive Systems' SBP2 features an ergonomic design that delivers improved control, performance and more operator comfort.


    ELECTROBAR�, ELECTROBAR ELITE�, ELECTROBAR� FS And FABA� Enclosed Conductor Bar Systems

    ELECTROBAR�, ELECTROBAR ELITE�, ELECTROBAR� FS And FABA� Enclosed Conductor Bar Systems provide an array of options and accessories for the electrification of overhead material handling equipment.


    Please contact the experts at Milwaukee Crane for assistance with Electromotive products and services.


    IMPULSE��P3 Series 2 AC Crane Control

    The Electromotive Systems IMPULSE��P3 Series 2 crane control gives operators total command over crane and hoist movements.

     

    IMPULSE��G+ Series 2 AC Crane Control 

    Electromotive Systems IMPULSE��G+ Series 2 crane controls have a proven track record of providing unmatched performance and reliability in the overhead material handling industry.


    IMPULSE��VG+ Series 2 AC Crane Control 

    Featuring our exclusive crane and hoist software, IMPULSE��VG+ Series 2 third generation controls offer many features designed for ease of use and enhanced safety.


    MAC��2000

    Motor Acceleration Control


    A reduced voltage soft start for applications needing cost-efficient motor control.


    Versatility, reliability and value are the three words that best describe Electromotive Systems' MAC��2000 motor acceleration control.


    Versatile

    A common unit can be utilized for single- and two-speed applications in the 230V/460V design for up to 15.2 amps. The 575V model is similarly designed with single- and two-speed capability in a common unit for up to 15.2 amps.


    Reliable

    MAC��2000 has been designed specifically to recognize the high duty cycle start, stop and jogging conditions that are associated with overhead material handling applications.


    Value

    The versatile design of this motor acceleration control reduces the need to maintain inventories of units with various voltage and speed capabilities as is seen with other soft start manufacturers. In addition, this unit has been produced to recognize the needs of our customers for a low cost control device for less sophisticated applications.


    Check out the additional features included in our MAC��2000 control and include it as part of your next crane control solution.


    Quality Design and Versatile Features to Keep You Up and Running


    • Adjustable starting torque and acceleration time.
    • Compact size.
    • Voltage ramp reset.
    • Phase loss protection.
    • Rugged construction for mounting on traveling cranes and monorails.
    • CMAA Class "D" Service.
    • 230/460 or 575 VAC, 3 phase input voltage.
    • No control signals are required. Simply connect power supply input and motor output.
    • Phase insensitive-L1, L2, L3 input voltage leads can be wired in any sequence.
    • UL/cUL Listed

    MAC��2000 can be easily applied to an existing contactor on a crane for single- or two-speed applications, or it may be ordered to use with an Electromotive Systems pre-engineered contactor panel.


    Pre-Engineered TCONTROLS� Panels 

    Electromotive Systems' single motion Pre-Engineered TCONTROLS� Panels feature high-quality, brand name components for precise and reliable performance.


    Custom TCONTROLS� Panels 

    Electromotive Systems' Custom TCONTROLS� Panels offer the ultimate solution for overhead material handling.


    REFLX� COLLISION AVOIDANCE CONTROLS


    Electromotive Systems' ReFlx 120 and 120 "Plus" Collision Avoidance Systems enhance the performance of your overhead material handling system by preventing crane to crane or crane to object collisions. And avoiding collisions means reduced maintenance costs and increased operator safety! The ReFlx Systems are ideal for use with all types of adjustable frequency drives and stepped controls.


    ReFlx 120 and 120 "Plus" Systems now feature a more reliable, solid-state control board in a smaller enclosure, making it easier to install. This means it can be used as a stand-alone unit, or be removed from its enclosure and mounted as one piece on your existing control sub-panel.


    Electromotive Systems offers two types of ReFlx Collision Avoidance Systems.


    Reflx 120

     

    ReFlx 120 System features a two-channel infrared sensor, which can be adjusted to give separate outputs for each channel at distances from 20 to 120 feet. The most commonly wired configuration is the use of one channel to provide the primary stop command to the motion control, while the second channel is used as a redundant stop command.


    The Reflx 120 "Plus"

     

    To provide an extra measure of safety to your collision avoidance system, the ReFlx 120 "Plus" offers you the addition of a second, shorter range, sensor. The first sensor, which has two channels, is most commonly wired to use the first channel as a "slow down" command or warning signal, and the second channel as a primary stop command. The second sensor has a single channel, with a range of 1.5 to 20 feet, and is most commonly used as a redundant stop command. The second sensor does not require a reflective target to be utilized.


    SYSTEM SPECIFICATIONS

     

    ReFlx 120:

    • (1) Two-Channel Sensor
    • (1) Controller
    • (1) Diamond Reflective Target (2ft x 2ft)

    ReFlx 120 "Plus":

    • (1) Two-Channel Sensor
    • (1) Single-Channel Sensor
    • (1) Controller
    • (1) Diamond Reflective Target (2ft x 2ft)

    COMPONENT SPECIFICATIONS

     

    Two(2) Channel Sensor:

    • Maximum Sensing Distance-120 ft.
    • Minimum Sensing Distance -20 ft.
    • Enclosure IP65 (NEMA 12, 13)
    • Fully Adjustable Scanning Range
    • Status LEDs For Each Channel
    • 16 ft. Sensor Cable

    Single (1) Channel Sensor:

    • Maximum Sensing Distance-20 ft.
    • Minimum Sensing Distance-1.5 ft.
    • Enclosure IP65 (NEMA 12, 13)
    • Fully Adjustable Scanning Range
    • Status LED For Sensor
    • 16 ft. Sensor Cable

    Controller:

    • Enclosure NEMA 12, 13
    • Dimensions-8"H x 6"W x 3.5"D

    Black Max� Motors

    The Electromotive Systems' Black Max� motor meets the needs of more common crane applications.


    Blue Max� Motors

    The Electromotive Systems' Blue Max� motor offers the most complete line of inverter duty motors in the industry.


    Brake, Encoders & Options

    Electromotive Systems offers brakes, encoders and options with our motors line, giving you the highest quality motor with the extra hardware you need to get any job done.


    PulseStar��MRT


    PulseStar��MRT is a stand-alone remote crane control system. The standard off-the-shelf system is designed for 3-motion, 2-step applications. MRT transmitters are powered with disposable AA batteries, giving you 24 hours of transmitter operating time!


    Each value-packed standard MRT system includes:

    • Ergonomically designed, lightweight hand held transmitter
    • Receiver in IP65 weatherproof enclosure
    • Battery holder with 3-"AA" batteries

    Available options:

    • Custom order transmitters ranging from simple start/stop to single-motion, 2-step configurations
    • Rechargeable battery kit

    PulseStar��jr


    PulseStar��jr. is a low cost, stand-alone, radio remote control system, designed to serve the common three-motion, two-speed overhead crane or monorail hoist.


    Each system includes:

    • Receiver in IP65 enclosure
    • Ergonomic hand held transmitter
    • Holster with belt clip
    • Two rechargeable batteries
    • Battery charger

    PulseStar��609


    PulseStar��609 remote crane control consists of a standard radio package designed for control of:

    • Four, two-step motions using the PBT transmitter
    • Three, three-step motions using the NVT transmitter
    • Four, five or seven motions, when using selectors on the transmitter.

    PulseStar��609 is a pre-engineered, off the shelf system, and is available with more common options.


    Each system includes:

    • Receiver in IP65 enclosure
    • PBT or NVT transmitter
    • Carrying belt
    • Two rechargeable batteries
    • Battery charger

    PulseStar��610


    Pulsestar��610 systems are designed for use with conventional control systems using reversing contactors or adjustable frequency drives. The engineered building block concept of the 610 system allows for a variety of options by mixing and matching components to develop customized, sophisticated radio configurations. Data feedback, 230 V DC operation, or marine/ hazardous environment applications, are examples of how the 610 system can be easily customized. With the variety of options available with the PulseStar��610, the challenge becomes defining the application so the system can be built to your needs.


    The PulseStar��610 system can be furnished with PBT, NVT, or GLT transmitters or a combination thereof.


    PBT Transmitter


    Weighing under two pounds, the PulseStar� PBT is a single-hand, easy-to-hold push button transmitter. The PulseStar� PBT standard model includes:

    • Eight, two-step buttons for four motions, two-speed applications
    • Auxiliary button for accommodating latching or momentary, creep speeds, etc.

    NVT Transmitter


    Our most popular transmitter with the overhead material handling industry, the PulseStar� NVT, is a belly box type transmitter with a sleek, compact and ergonomic design. Standard features on this transmitter include:

    • Two, two-axis joysticks to control up to four motions
    • Auxiliary toggle
    • Three-position selector switch for independent/combined control

    This transmitter is also available with three-step detent joysticks for control of up to four motions, and up to six step-less lever masters.


    GLT Transmitter


    Meeting the demands of special and unique applications, PulseStar� GLT transmitters are built to customer specification. Features include:

    • Up to three, dual-axis joysticks or seven lever masters
    • Auxiliary toggles
    • Three-position selector switch

    Also available are a variety of transmitter options, such as:

    • Proportional or digital joysticks
    • Up to three single-axis levers, one to five-step or proportional
    • Lift to operate/push to operate safety switches.
    • Lift to operate toggle switches for vacuum/magnet control
    • Isolation gates

    GLT Transmitter with Data Feedback


    Includes the same features and options as the standard GLT plus LCD for remote read out of:

    • Weights
    • Diagnostics
    • Crane position, speeds, etc.
    • Order picking and placing
    • Many other options

    Four-line display with 16 character string per line


    Electromotive Systems offers a complete line of festooning hardware and cable to efficiently complete the delivery of power or control in a variety of material handling applications.


    Our product range includes:


    • Festoon Systems
    • C-Track
    • Heavy-Duty Aluminum
    • Heavy-Duty I-Beam
    • Mill Duty I-Beam
    • Tag Line Wire Supported

    Plug and Play Festoon Hardware


    Electromotive� Cable


    These versatile systems can be furnished with a myriad of options, offering you maximum flexibility in the design of your festoon system. Components are also available from stock, allowing you to meet the needs of today's most demanding customers.

     

    In addition, Electromotive Systems offers a full range of round, flat and specialty cable, designed specifically for festooning applications. Most sizes are available for same day shipment. Round and flat cable can also be ordered with your companies name, logo and phone number in full reel quantities, which reminds customers where you can be reached for new equipment, parts or service.

     

    Need your festoon fully assembled to minimize installation time? No problem! Electromotive Systems can furnish pre-assembled and wired festoon systems complete with control box trolleys, pendant stations and plug and play hardware. If you really want to reduce labor expense associated with field wiring order your pre-assembled plug and play festoon system with a matching Electromotive TCONTROL�, IMPULSE�, MAC��2000 or Contactor Panel.


    SBP� PENDANT PUSH-BUTTON STATIONS


    Featuring a lightweight, ergonomic design, Electromotive Systems SBP� Pendant Push-button Stations provide optimum control and performance with less effort and fatigue than traditional pendants. With most models weighing under two pounds, this slim-line pendant rests easily and comfortably in the palm of your hand. SBP is available in 2 to 12 button configurations, single, two or three speed designs, momentary or maintained on/off, and with a variety of options and accessories.


    Standard Features


    • Ergonomic design for greater comfort and less fatigue.
    • Polycarbonate pendant enclosure is double insulated, chemically resistant and rated NEMA 1, 2, 4, 4x and 12.
    • Elastic, chemically resistant gasket ensures a tight seal between enclosure front and back.
    • Switches are rated for 3 Amps, 250 Volts AC.
    • Single and two-speed button pairs have mechanical interlocks for greater safety.
    • Suitable for temperatures ranging from -10�F to 150�F.
    • Tapered round cable entry gland can be cut to the proper cable diameter and a slide-on rubber boot ensures a watertight seal.
    • Strain relief hardware and plastic cable grip relieves tension on individual cable conductors.
    • On 6 through 12 button models, a shrouded knock-out hole is provided for the installation of a pilot light or horn accessory.
    • To simplify wiring, a common circuit is pre-wired on all switches.
    • A wide variety of specialty and accessory switches are available.
    • Standard units ship from stock.
    • Factory pre-wired pendants ship with minimal lead time.

    We offer standard pre-assembled pendant stations, pendants pre-wired with Electromotive Systems Round Pendant Cable, and custom built pendant assemblies. The choice is yours.


    SBP2� PENDANT PUSH-BUTTON STATIONS


    Featuring a lightweight, ergonomic design, Electromotive Systems SBP2 Pendant Pushbutton Stations provide optimum control and performance with less effort and fatigue than traditional pendants. With most models weighing under two pounds, this slim-line pendant rests easily and comfortably in the palm of your hand. Quick delivery a priority? Not a problem - most standard SBP2 pendants are available from stock and can be shipped the same day we receive your order. And, with a high-impact resistant, watertight enclosure to survive the most brutal environments, SBP2 is ideally suited for any industrial application.


    SBP2 has been extensively tested to insure quality and years of reliable service.


    The photo (at right) shows the SBP2 pendant switches during a one million cycle test.


    Standard Features


    All SBP2 pendant pushbutton stations include the following features:


    • Ergonomic design for increased comfort and decreased fatigue
    • Impact resistant pendant enclosure is double insulated, chemically resistant and rated NEMA 1, 3, 4, 4X and 12
    • Mechanical interlocks on Single- and Two-Speed switches for enhanced safety
    • Cumulative contacts on Two- and Three-Speed Switches provide precise detent feel
    • Switches are rated 3 Amp, 250 Volt AC
    • Easy-to-read button functions
    • Dual stainless steel hanger rings allow for easy attachment to strain relief cable
    • Easily removable button hoods and nameplates
    • Operating temperature range: -10� F to 150� F
    • UL/CUL approved
    • Quick delivery of standard models from stock

    Options:  Pendant Station


    Configured with the various accessories listed below, SBP2 may be customized to meet any application requirement.


    • Single Speed Switch inserts with one normally closed (N.C.) and one normally open (N.O.) contact per button
    • Mechanical interlocks on Single- and Two-Speed switches for enhanced safety
    • 120 Volt AC pilot light (mounting in upper left hand accessory hole and/or standard button hole)
    • On/Off key switch with key removable in off position
    • Two and three position selector switches
    • Four position selector key switch with key removable in the fourth (off) position
    • Red mushroom On/Off switch
    • Blank to cover button hole
    • J-Box mounting for additional switches and/or indicating lights
    • Tandem Mounting (8-12 Button Pendants) for multifunction/automation applications
    • Stainless steel wire mesh cable grip

    Custom single and double T-box configurations are available. Consult factory for additional information.


    ELECTROBAR�, ELECTROBAR FS�, ELECTROBAR ELITE� AND FABA� ENCLOSED CONDUCTOR BAR SYSTEMS


    Providing an array of options and accessories, Electromotive Systems offers the following conductor bar systems:


    8-Bar

     

    An enclosed conductor bar system used interchangeably with common bottom entry 8-Bar designs. Available for 90, 110, 250 and 350 Amp systems.


    V-Bar

     

    An enclosed conductor bar system with an inverted V running surface for positive tracking of the collector shoe. Available are 90 and 110 Amp systems.


    HX Series

     

    An aluminum extruded inverted high amperage conductor bar with stainless-steel lined contact surface. Available in 400, 700, 1000 and 1500 amp designs for 600 volts A.C./250 volts D.C. heavy duty applications. The conductors are joined with a bolted joint kit connection assembly that assures the full current carrying capacity without interfering with the free travel of the collector contact and is designed to automatically allign the conductor bar sections during installation. Nylon span-in, steel clamp or insulated hanger assemblies provide an additional level of insulation as well as rigid support of the conductor sections. Collector assemblies are offered in single or double copper graphite contact shoe arrangements that accomodate travel speeds of up to 900 ft per minute.


    Collector Assemblies UL Listed

    for 8-Bar, V-Bar, FS-Bar, and HX Series Collector Systems

     

    Electromotive Systems provides collector assemblies featuring corrosion resistant, pivot pins and impact-resistant poly-carbonate arms and body which are universally interchangeable. The impact-resistant polycarbonate arms are electrically insulated, and are safety-yellow in color for improved visibility. (These units are available in single and double shoe configurations for 8-bar and V-bar from 100 to 200 Amps. The same collector assembly is used for our HX series bar with a different head assembly rated from 200 to 400 Amps.)


    ELECTROBAR� FS 


    We're proud to introduce our new Electrobar FS� Conductor Bar System for the electrification of cranes, monorails and automated storage and retrieval systems! Here are just a few of the important features the Electrobar FS Conductor Bar system has to offer:

    • A unique shape that maximizes safety and performance
    • A UL Listed "finger safe" design that minimizes the potential for electrical contact
    • Easy installation and maintenance, which reduces labor costs.

    Available in 90, 110, 125*, 250 and 400 AMP ratings, and single and double shoe collector assemblies. Snap-in hanger kits are available for 2, 3 and 4 pole applications.

     

    *Suitable for 125 Amp configurations in non-UL applications.


    ELECTROBAR ELITE� 

     

    Electrobar Elite�  A totally enclosed 4 conductor bar system available in 60, 100, 130 and 200 Amp configurations. IP23 Finger Safe Rating. Lightweight, rigid design. Modular construction and other design features significantly reduce installation time and cost as compared to other conventional conductor bar systems.


    FABA�


    FABA� A small, compact multi-conductor bar system designed for automated electrified monorail (AEM) systems, up to 100 Amps.

Omnipulse DC Hoist Controls
 
 
Model Number Motor Frame Voltage Hp
2065-0PD-H1 610 or 808 230 VDC 65
2135-0PD-H1 614 or 812 230 VDC 135
2200-0PD-H1 616 or 814 230 VDC 200
2265-0PD-H1 618 or 816 230 VDC 265
2500-0PD-H1 622 or 820 230 VDC 500
 
 
 
Omnipulse DC Bridge & Trolley Controls
 
Model Number Motor Frame Voltage Hp
2030-0PD-T1 606 or 804 230 VDC 30
2050-0PD-T1 608 or 806 230 VDC 50
2075-0PD-T1 610 or 808 230 VDC 75
2100-0PD-T1 612 or 810 230 VDC 100
2135-0PD-T1 614 or 812 230 VDC 135
2030-0PD-T2 2 x 606 or 2 x 804 230 VDC 30
2050-0PD-T2 2 x 608 or 2 x 806 230 VDC 50
2075-0PD-T2 2 x 610 or 2 x 808 230 VDC 75
2100-0PD-T2 2 x 612 or 2 x 810 230 VDC 100
2135-0PD-T2 2 x 614 or 2 x 812 230 VDC 135
 
Supply voltages: 200-300 Volts DC. Nominal low voltage operation down to 100 volts.
 
Motor Type:  DC Series -Wound
Control Range: 0-100%
Operating Frequency: 2kHz�10kHz
Logic Type: Microprocessor Digital Logic
Model MAC��2000
Voltage Rating
  • 230/460V-15.2 Amp, 3 Phase
  • 575V-15.2 Amp, 3 Phase
Application Single- or Two-Speed
Duty Cycle CMAA Class "D" Service
Frequency 50/60 Hz
Overload Capacity
  • 250% of Rated Current for 1 Minute
  • 300% of Rated Current for 40 Seconds
  • 450% of Rated Current for 5 Seconds
Ambient Temperature 14� to 104�F (-10� to +40�C)
Dimensions-In Inches 4.12" (W) x 7.18" (H) x 2.62" (D)




  • Duct-o-Wire

    Duct-O-Wire

    Electrification and Control Products for Overhead Cranes


    Duct-O-Wire manufactures electrification and controls products for:

    • Overhead cranes
    • Trolleys
    • Monorails
    • Hoists
    • Automatic stacker storage and retrieval systems
    • Material handling applications requiring safe and economical moving power solutions

    14 Gauge C-Track Catalog Pages in PDF

    (678 KB)


    14 Gauge C-Track Installation Pages in PDF

    (732 KB)


    12 Gauge C-Track Catalog Pages in PDF

    (572 KB)


    12 Gauge C-Track Installation Pages in PDF

    (172 KB)


    Figure 8 Conductor Catalog Pages in PDF

    (1297 KB)


    Figure 8 Conductor Installation Pages in PDF

    (1071 KB)


    Heavy Duty Bar Catalog Pages in PDF

    (1020 KB)


    HD-500 Installation Pages in PDF

    (949 KB)


    HD-1000-1500 Installation Pages in PDF

    (907 KB)


    There are hundreds of options!

    Please contact us for assistance.


    Collision Avoidance Catalog Pages in PDF

    (300 KB)


    VFD Catalog Pages in PDF

    (1080 KB)


    See more information on

    Duct-O-Wire products:


    • Festoon systems
    • Conductor bar systems
    • Pendant controls
    • Collision avoidance systems for bridge cranes
    • Variable frequency drives for variable speed crane operation

    Please contact Milwaukee Crane's expert staff for applications assistance with Duct-O-Wire products.


    Festoon Cable & Track Systems


    • 14 Gauge C-Track and 12 Gauge C-Track systems are available in galvanized or stainless steel for flat or round cable and air hoses.
    • Factory pre-formed curves in 14 gauge systems are available in 4', 5', 6', and 7' radii.
    • Aluminum track is available for pipe type trolleys for both straight and curved systems.
    • Wire supported systems available for both flat and round cables.
    • New pendant control trolleys with Quick Plug disconnects available.

    Special Applications & Services for Festoon Systems


    • Stainless steel and brass bearings for special applications.
    • Precision bearing available in both 14 and 12 gauge sizes for long life wear and high speeds.
    • Both steel and plastic saddles available for flat and round cables.
    • Pre-assembled systems with cables on trolleys and packed for rapid installation.
    • Standard cables available in sizes ranging from #2AWG to #16AWG.
    • Cable fittings in both cast metal with grommets and non-metallic shrink type.
    • Tiered saddles for special cable loads or configurations.

    Conductor Systems


    • Bottom contact Figure 8 conductors from 90 to 250 amp.
    • Side contact Figure 8 conductors from 90 to 350 amp.
    • Heavy duty conductors in 500, 1000, and 1500 amp ratings with stainless steel running surface for longer wear and higher speed operation.

    Special Applications and Services for Conductors


    • Cover with ultra violet additive for outdoor sun locations.
    • High temperature cover (280F) for all Figure 8 and HD-500 conductors.
    • Stainless steel conductors in Figure 8 for corrosive atmospheres.
    • Epoxy coated, stainless steel, and insulated hangers for wet and corrosive atmospheres.
    • Factory built expansion sections and anchors for expansion control.
    • Factory bent curved conductor sections for Figure 8 systems.
    • A variety of Figure 8 covers for matching competitive systems.
    • Heated conductor systems for ice prevention on outdoor systems or freezer storage.
    • Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions.
    • Bare conductors available for extreme heat applications.
    • Special long-wear collector brushes for Figure 8 systems.
    • Cleaning brushes for Figure 8 and HD conductors.

    Control Pendants


    • Bright Yellow Finish for Easy Visibility
    • Pre-Wired Stations Available from Factory
    • Two-Piece Enclosure Simplifies Field Wiring
    • Cord Grip and Bracket for Strain Relief Cable
    • Easy to Read Snap-In Adhesive Name Plates
    • NEMA 1, 3, 4, 4x, and 12
    • RPB, K, L and PPS Series Switches are UL Listed and CSA Approved. 
    • J and RPS Series switches CSA Approved.
    • Push Button Operator Instruction and Warning Label Available

    Collision Avoidance Systems


    Laser Optic Sensor


    • Laser Optics Sensor Kit for 2 Stage On / Off
    • Switching Includes Pre-Wired Unit with Transformer, Relays, 40' Cable and Reflector
    • Class 1 Laser for Maximum Accuracy
    • Two Programmable Trigger Events
    • DIN Mounted Components for Easy Installation
    • Distance Range from 8 Inches to 60 Feet
    • Also Available with 80' Cable as CAS-2L80

    Infra Red Optic Sensor 


    • IR Optic Sensor Kit for Distance On / Off Switching
    • Includes Mounting Bracket, Reflectors, and Hardware
    • Sensor Relays Can Open or Close a Circuit
    • For Use With 24 to 240 VAC or 12 to 240 VDC
    • Outputs for N.O. or N.C. Circuit Control
    • Also Available with Delayed On / Off as CAS-1D

    Variable Frequency Drives


    • Reversing Contactor Systems
    • Complete Wound Rotor System with Resistors
    • Integrated VFD/Contactor Controls
    • Single and Multiple Motions
    • Compatible Plug and Play Systems (Pre-wire Available)
    • Factory Installed and Wired Radio Controls
    • Total In House System Design and Support
  • Insul-8

    Insul-8 Conductor Bar

    Crane Electrification, Hose Reels, Cable Reels, Pendants, Radio Controls, Trench Covers


    As the original inventor of insulated figure 8-shaped conductor, Insul-8 set the standards for crane electrification over 50 years ago. Milwaukee Crane's expertise and product offering are unparalleled. Insul-8 offers a full range of insulated conductor bar designs from 40 - 6,000 amperes. Many special designs such as collectors, insulated covers and even the conductor bar itself come in numerous configurations to fit your application requirements.


    Whether you need traditional, economical 8-bar, V-contact bar (Safe-Lec 2) -- the new standard for electrification, or third rail for a people mover system, or any other conductor bar, choose Insul-8. We have what you need to keep your systems moving.


    Conductor bar is used in applications such as overhead crane bridge and runway electrification, port equipment and large transit systems. 


    See more information on

    Insul-8 products:


    • 8 Bar
    • Cluster Bar
    • Hevi-Bar I
    • Hevi-Bar II
    • Safe-Lec-2 V-Contact Bar
    • Side Contact Bar
    • Cable Festoon
    • Heavy Duty Festoon
    • Cable Reels
    • Hose Reels / 1400 Series
    • Magnetic Coupler Reels
    • Motor Driven Cable Reels
    • Push Button Pendants
    • Radio Controls
    • R Series Slip Rings
    • Trench Cover
    • Comes Tunnelflex

    Please contact Milwaukee Crane's expert staff for applications assistance with Insul-8 products.


    8-Bar Conductor Bar

    Insul-8's figure 8-bar has been the industry standard for over 50 years.

    We invented it. We perfected it. Don't settle for an imitation. Buy the real thing!

     

    • 40-500 Amp
    • UL Listed/ CSA Approved
    • Low Maintenance
    • Quick and Easy Installation

    View PDF File

    (1,124 KB)


    Cluster Bar

    Cluster Bar features a "V"-Contact surface for positive shoe contact.

     

    • 40 Amp galvanized steel
    • 120 Amp Electrolyte Copper
    • Complies with European International Protection IP2 Standards/ UL Listed/ CSA Approved
    • PVC Cover rated to 160 degrees F.
    • Operates in lateral or vertical mount for speeds up to 600 feet per minute
    • Can be curved horizontally and vertically

    View PDF File

    (817 KB)


    Hevi-Bar I

    Hevi-Bar I is designed for heavy-duty, high speed applications such as material handling cranes and ship loading equipment.

     

    • 700, 1000, & 1500 Amp
    • UL Listed
    • All components are fully insulated for both indoor and outdoor use
    • Long wearing, corrosion resistant stainless steel contact surface is specially designed for higher operating speeds
    • Strong, rigid assembly capable of withstanding high fault loading.

    View PDF File

    (619 KB)


    Hevi-Bar II

    Hevi-Bar II delivers high-capacity electrical service for factories, storage yards, people movers, and other demanding applications.


    • 400-1500 Amp with PVC Cover
    • 700-1000 Amp with High Heat Cover
    • UL Listed
    • Choice of insulating covers with temperature ratings from 167 degrees F. to 399.0 degrees F.
    • Uses air contact design rather than mass to dissipate the heat generated by high speed operating conditions.

    View PDF File

    (878 KB)


    Safe-Lec-2 V-Contact Bar

    Find out why crane manufacturers are making Safe-Lec 2 V-Contact bar the new standard for crane electrification.


    • Available in 60-400 Amp, in one common cover
    • Collector shoe is guided by the bar, not the cover, for superior electrical contact
    • IP2 Certified for optimum protection
    • Multiple runs can be installed smoothly and effortlessly with single bolt, multi-pole hangers
    • Hanger supports feature slide-in slots to eliminate hassles with holes that don't line up
    • Systems up to 150 meters (nearly 500 feet) without expansion systems
    • Enclosed wiring for connections on collectors ensure safe and simple installation
    • One-piece snap-on joint cover provides total protection of joints
    • No exposed live parts to contact
    • Heater Wire Systems and SS Hardware available

    View PDF File

    (2,036 KB)


    Side Contact Conductor Bar


    • Side Contact conductor systems are safe, reliable, economical and low-maintenance.
    • Available in 90-350 Amp
    • UL Listed/ CSA Approved
    • Quick and Easy Installation

    View PDF File

    (4,149 KB)


    Cable Festoon

    Insul-8 offers a full line of high quality, low maintenance Motiv-8™ festoon systems.


    • Stretched Wire "tag line" systems
    • C-Track "box track" Systems: Standard Duty (14 ga.) and Heavy duty (12 ga.)
    • Square Bar Systems: Standard and Heavy duty
    • I Beam Supported Trolleys

    View PDF File

    (937 KB)


    Heavy Duty Festoon

    Designed, engineered and manufactured primarily for steel mills, port facilities and other heavy industrial applications.


    • Hardened Steel Rollers
    • Galvanized Steel Construction
    • Single Piece, Formed Steel Saddle -- No Welds
    • Corrosion Resistant Hardware
    • Modular Designs

    View PDF File

    (1052 KB)


    Cable Reels

    Insul-8 provides a wide range of standard and custom designed spring driven reels to meet your needs. We are your cable reel experts.

     

    • Commercial Duty Cord Reels
    • Industrial Duty 1400 Series Reels
    • Heavy Duty D, E, F, H & M Series Reels
    • Hazardous Location Reels, Welding Reels, Grounding Reels, Balance Reels, Torque Reels.

    View Catalog PDF File

    (1.656 KB)


    Hose Reels / 1400 Series

    Make work areas safer, eliminate hose handling problems, extend the life of your hose. Get an Insul-8 Hose Reel.

     

    • 100% unassisted spring retraction
    • 14 gauge all-steel construction
    • Containerized spring for added safety
    • Swivel cover standard on all reels
    • Reels come preinstalled with 300 PSI flexible hose.
    • You may also purchase the reel alone.

    View PDF File

    (963 KB)


    Magnetic Coupler Reels

    Find out why Insul-8's magnet-duty Magnetic Coupler Reels are the revolution in steel mill reels.

     

    • Ideal for mills due to extreme consistency, reliability, and service-free operation.
    • Remarkable stability of the permanent mag. coupler's torque during pay-out and take-up.
    • All critical components are completely sealed and protected from the elements.
    • Never change a spring again.

    View PDF File

    (694 KB)


    Motor Driven Cable Reels

    Motor-Driven Reels are used in a variety of applications including material handling, port side cranes, yard cranes and mill applications.

     

    • Drive options: Magnetic coupler, Torque motor, Electro-Hydraulic motor
    • Spool Options: Bulk wrap, Mono Spiral, Level Wind
    • High-Voltage and Standard Slip Rings
    • Fiber Optic Transmitter Available to transfer large amounts of information with low level attenuation.
    • Comesflex™ Trench Cover available to protect against potential damage to power and control cable.

    View PDF File

    (1,631 KB)


    Push Button Pendants

    Insul-8's Series 8000 and Series 2000 push button pendants are ideal for controlling material handling systems.


    • Series 8000 is available in two to twelve buttons and features a safety-yellow enclosure, single/two and /three speeds, neoprene booted buttons, simplified field wiring, thanks to two-piece enclosure, UL & CSA approved.
    • Series 2000 is available in two-button, features an ergonomic comfort design, internal and external strain relief for more comfortable operation.

    View PDF File

    (5,864 KB)


    Radio Controls

    Insul-8 C, D, and J series radios are all designed with the crane market in mind. The Protean is general purpose radio remote control for industrial use. These units feature advanced SMT technology and advanced digital technology for small compact and reliable designs.


    • C - The C Series radio is an 8-button radio offered in single or two speed configurations.
    • D - The D Series radio is a 12-button radio offered in single or two speed configurations that also include an A/B/Both selector.
    • J - The J Series features a 5-Speed dual joystick configuration with dual A/B/Both/Off selectors.
    • Protean - remotely control many different applications including but not limited to lift tables, transfer cars, chain hoists, single and two motion cranes, boat ramps, rack and pinion hoists, conveyor systems, tail gate lifts, door openers, lighting control.

    Pendants & Radios

    (231 KB)


    R Series Slip Rings

    Meet our upgrade to our popular industrial slip ring line. Our R-Series employs the latest in material and design technology.


    • Self-adjusting and modular with easy to maintain components
    • Cost-effective alternative
    • Wide number of amperage choices and bore sizes
    • All designs meet UL class C requirements

    View PDF File

    (719 KB)


    Trench Cover

    A continuous flexible rubber strip for covering cable laid in trenches for environments such as steel yards and harbors. Advantages include:


    • Inexpensive installation
    • No maintenance required
    • Total protection of cables and operational safety
    • No speed limitation for mobile engines, such as cranes
    • Maximum functionality despite high speed of mobile engine
    • Operates under any weather conditions

    View PDF File

    (1,425 KB)


    Comes Tunnelflex

    Cable Reels, Hose Reels and Trailers for feeding machines inside tunnels, quarries, and mines. All reels may be driven by:


    • Motor Torque
    • Electro-Magnetic Coupling
    • Asynchronous Motors
    • Permanent magnetic coupling
    • Hydraulic Motors
    • Pneumatic Motors

    Please contact us.


    Please contact Milwaukee Crane's expert staff for assistance with Insul-8 products and applications.

RADIO CONTROLS

  • Alpha

    Alpha Radio Controls

    Great radio controls for cranes at a very affordable price


    Alpha 500 Series Specifications in PDF

    (1698 KB)


    Alpha 3000 Series Specifications in PDF

    (1821 KB)


    Twister 2X Series Specifications in PDF

    (936 KB)


    Alpha 500 Series Radio Crane Control


    Crane operators really like the light weight (10 ounces or less) of this compact radio control transmitter and the fact that it can be easily operated with gloves on.


    The Alpha 500 series utilizes advanced microprocessor control with highly evolved system software that has redundant error checking and correcting capabilities to

    ensure 100% error-free encoding, transmitting, receiving, decoding and controlling of all output relays.


    Other features include:


    • More than 150 hours of continuous operation between battery replacements using just two (2) off-the-shelf "AA" alkaline batteries.
    • 30 User-Selectable RF Channels adjusted via simple dip-switch settings.
    • The enclosures are fully sealed and impervious to dust, water, oil, acids, alkaline, heat and sunlight, which provide trouble-free operation in high moisture
    • environments and outdoor applications.
    • Custom in-house designed 2-speed pushbuttons are extremely durable and reliable for a minimum of one million press cycles.

    Alpha 3000 Series Radio Crane Control


    The Alpha 3000 series uses advanced RISC microprocessor control with highly

    evolved system software that has redundant error checking and correcting

    capabilities to ensure 100% error-free encoding, transmitting, receiving, decoding

    and control of all output relays.


    • To ensure maximum operating safety the system incorporates numerous important safety features, which include transmitter pushbutton fault-detection 8 visual warning 8 auto-shutoff, transmitter low voltage
    • detection 8 visual warning 8 auto-shutoff, receiver fault-detection 8 auto-shutoff, and
    • receiver MAIN relay auto-disconnect when the system is in sleep mode or when transmitter low-voltage condition is detected.
    • Both transmitter and receiver utilize advanced 16+1 bit microprocessor
    • control.
    • The availability of 65,536 sets of unique ID code + 30 distinct RF channels ensure that only commands from a matching control transmitter can be carried out, reducing the risk of interference from outside sources.
    • Custom in-house designed 2 and 3-speed pushbuttons are extremely durable and reliable for a minimum of one million press
    • cycles.
    • Unlike most 2 and 3-speed pushbuttons available from
    • other radio control manufacturers, these pushbuttons are easily
    • manipulated even when the operator is wearing gloves. The snapaction
    • steps provide positive tactile feedback to the operator.
    • The receiver is equipped with PLL (Phase Lock Loop) synthesized RF module with 30 sets of user selectable RF channels (narrow band FM) adjusted via simple dip-switch settings.

    Twister 2X Radio Controls


    The Twister 2X is a highly sophisticated industrial radio remote control system. The versatile features of Twister 2X permit its usage in a wide range of industrial applications.


    The system can be used to control all types of industrial cranes, tower cranes, building construction equipment, automatic control systems, mining equipment, and many others...


    The Twister 2X incorporates numerous advanced safety features and software programming that will ensure maximum security and safety in the work place.


    Other applications for the Twister 2X include:


    • Mining equipment
    • Trolleys
    • Monorails
    • Truck-mounted lifting equipment
    • Material handling equipment
    • Automatic control systems

    Contact Milwaukee Crane for assistance with your radio control applications.

  • TeleRadio

    TELE RADIO, Wireless Remote Technology that WORKS!


    TELE RADIO was founded in 1955 and is an expansive marketing and technology-oriented company, one of the leaders in the field of wireless remote control. Tele Radio developa, manufacturea and markets wireless remote controls for industrial and sells functional solutions for industry around the world.  The company has over 50 years of experience of wireless remote control and world class products.


    System 860 for lifting applications


    System 860 is recommended for lifting applications such as cranes, overhead cranes, lift tables, etc. System 860 offers up to 24 functions, excluding safety relays. It transmits on up to 69 different frequencies between 433 and 434 MHz and has an approved stop function.


    Mini-10 transmitter 860TX-AxA

    Frequency: 433-434 MHz (16 channels)

    Functions: 4x2+2x1, On/Off 

    Power supply: Rechargeable battery

    Weight: Apr. 270 g

    Dimensions: 160 x 70 x 35 mm

    Protection: IP54


    Maxi-10 transmitter 860TX-0xB

    Frequency: 433-434 MHz (69 channels)

    Functions: 20 (10x2), On/Off

    Power supply: Rechargeable battery

    Weight: Apr. Apr. 270 g

    Dimensions: 160 x 70 x 35 mm

    Protection: IP54


    Maxi-12 transmitter 860TX-12-0xB 

    Frequency: 433-434 MHz (69 channels)

    Functions: 24 (12x2), On/Off

    Power supply: Exchangeable rechargeable battery (NiMH)

    Weight: Apr. 450 g

    Dimensions: 210 x 80 x 40 mm

    Protection: IP65


    Mini-10 receiver 860RX-MINI

    Frequency: 433-434 MHz (16 channels)

    Relay output: 10 (4x2+2x1) +2 for stop function.

    Stop relay; Potential free, close 8A AC 1

    Function relay; Potential free, open/close 16A AC 1

    Function relay 1-8; Momentary

    Function relay 9-10  Momentary/Latching

    Simultaneous 

    Interlocking functions 

    Power supply: 12/24V AC/DC and 48/115/230V AC

    Dimensions: 256 x 217 x 85 mm incl. mounting brackets 

    Protection: IP65


    Maxi-10, Maxi-15/24 receiver 860RX-MIDI/MAXI

    Frequency: 433-434 MHz (69 channels)

    Relay output: Maxi; 15 or 24, +2 for stop function.

    Midi; 10, +2 for stop function 

    Stop relay; Potential free, close 8A AC 1

    Function relay; Potential free, open/close 16A AC 1 

    Simultaneous

    Momentary/Latching 

    Interlocking functions 

    Power supply: 12/24V AC/DC and 48/115/230V AC

    Dimensions: 256 x 217 x 85 mm incl. mounting brackets 

    Protection: IP65


    System T60 for industrial applications


    To control industrial applications wirelessly, such as pumps, crushers, concrete mixers, robot control, high pressure washers, sandblasting, hydraulics, lighting, conveyor belts, etc., we recommend System T60


    You can control up to 1000 objects with System T60. This system is extremely flexible, with a number of integral functions. Each transmitter is programmed with both its own set code to allow it to control private objects with limited authorizations, and adjustable codes for general objects that need to be controlled by more than one person. System T60 transmits on 433,92 MHz or 869,85 MHz. 


    Midi-T transmitter T60TX-0xSTL/STM

    Frequeny:STL-transmitter;433,92 MHz

    STM-transmitter; 869,85 MHz

    Functions: 1,2,3,4,6 or 8 

    Power supply: 3 exchangeable 1,5V battery type; AAA

    Weight: Apr. 120 g incl. battery

    Dimensions: 113 x 66 x 35 mm incl. clips

    Protection: IP65


    Maxi-R transmitter T60TX-0xxRL

    Frequency: 433,92 MHz 

    Functions:

    Power supply: 9V exchangeable battery type; 6F22 or rechargeable battery 

    Weight: Apr. 250 g incl. battery

    Dimensions: 160 x 70 x 35 mm

    Protection: IP54


    Standard receiver T60RX-04ASL/ASM

    Frequency: ASL-receiver; 433,92 MHz

    ASM-receiver; 869,85 MHz

    Code comb.: ASL-receiver; 59.049 and unique codes 16.777.216

    ASM-receiver; unique codes 16.777.216 

    Relay output: 10 codes / relay

    Power supply: 12-24V AC/DC, 230V AC, 48V AC, 115V AC

    Dimensions: 120 x 133 x 45 mm

    Protection: IP65


    Plug-in receiver T60RX-01APL

    Frequency: 433,92 MHz

    Code comb.: 59.049 and unique codes 16.777.216

    Relay output: 1, self-learning, 10 codes. Potential free, close 8A

    Power supply: 12-24V AC/DC

    Dimensions: 70 x 58 x 40 mm

    Protection: IP20


    Maxi-D transmitter T60TX-04EDL

    Frequency: 433,92 MHz

    Functions: 2x4 

    Power supply: exchangeable 9V battery type; 6F22 or rechargeable battery

    Weight: Apr. 250 g incl. battery

    Dimensions: 160 x 70 x 35 mm

    Protection: IP54


    Multicode receiver T60RX-03AxGL

    Frequency: 433,92 MHz

    Code comb.: unique codes 16.777.216

    Relay output: 3, all functions are momentary. Function 1 and 3 are interlocked, function 2 has priority over function 1 and 3.

    Power supply: 12-24V AC/DC, 230V AC, 48V AC, 115V AC

    Dimensions: 120 x 133 x 46 mm

    Protection: IP65


    Standard receiver T60RX-08ASL/ASM

    Frequency: ASL-receiver; 433,92 MHz

    ASM-receiver; 869,85 MHz

    Code comb.:ASL-receiver; 59.049 and unique codes 16.777.216

    ASM-receiver; unique codes 16.777.216 

    Relay output: 5 codes / relay

    Power supply: 12-24V AC/DC, 230V AC, 48V AC, 115V AC

    Dimensions: 187 x 155 x 75 mm

    Protection: IP65


    DIN receiver T60RX-03ADL

    Frequency: 433,92 MHz

    Code comb.: 59.049 and unique codes 16.777.216

    Relay output: 3, self-learning, 10 codes. Potential free, open / close 8A.

    Power supply: 12-24V AC/DC

    Dimensions: 85 x 627 x 30 mm

    Protection: IP20


    System T20 for door, port & gate applications


    We recommend system T20 for wireless remote control of door, port and gate applications. This system includes more than 16 million set codes, and each transmitter has its own specific, individual code. This means that finding two transmitters on the market that share one and the same code is more or less impossible. System T20 transmits on 433,92 MHz or 869,85 MHz, and despite its small size it is extremely secure.  


    Transmitter T20TX-0xNKL/NKM

    Frequency:NKL-transmitter:433,92 MHz

    NKM-transmitter: 869,85 MHz

    Functions:NKL-transmitter: 1,2 or 3

    NKM-transmitter: 1 or 3 

    Power supply: Exchangeable 3V battery type: CR2032

    Weight: Apr. 50 g incl. battery

    Dimensions: 71 x 39 x 13 mm incl. clips Protection: IP 65


    Maxi-M transmitter T20TX-15SMM

    Frequency: 869,85 MHz

    Functions: 15

    Power supply: Exchangeable 9V battery type; 6F22

    Weight: Apr. 155 g incl. battery

    Dimensions: 143 x 62 x 28 mm

    Protection: IP65


    Standard receiver T20RX-03ASL/ASM

    Frequency: ASL-receiver; 433,92 MHz

    ASM-receiver; 869,85 MHz

    Code comb.: Unique codes; 16.777.216

    Relay output: ASL-receiver; 3, stores 30 codes

    ASM-receiver; 3, stores 60 codes

    Power supply: 12-24V AC/DC

    Dimensions: 120 x 133 x 45 mm

    Protection: IP65


    DIN receiver T20RX-03ADL/ADM 

    Frequency: ADL-receiver; 433,92 MHz 

    ADM-receiver; 869,85 MHz

    Code comb.: Unique codes 16.777.216

    Relay output: ADL-receiver; 3, stores 30 codes

    ADM-receiver; 3, stores 60 codes

    Power supply: 12-24V AC/DC

    Dimensions: 85 x 62 x 30 mm

    Protection: IP20


    Plug-in receiver T20RX-01APL

    Frequency: 433,92 MHz

    Code comb.: unique code 16.777.216

    Relay output: self learning, 60 codes. Potential free, close 8A

    Power supply: 12-24V AC/DC

    Dimensions: 70 x 58 x 40 mm

    Protection: IP20


    Mini-H transmitter T20TX-0xSHL/SHM

    Frequency:SHL-transmitter: 433,92 MHz

    SHM-transmitter: 869,85 MHz

    Functions: 1, 3 or 6

    Power supply: Exchangeable 3V battery type: CR2430

    Weight: Apr. 40 g incl. battery

    Dimensions: 40 x 84 x 16 mm incl. clips

    Protection: IP 40


    Maxi-M transmitter T20TX-15DMM

    Frequency: 869,85 MHz

    Functions: 3, possibility to remote up to 1000 objects

    Power supply: Exchangeable 9V battery type; 6F22

    Weight: Apr. 155 g incl. battery

    Protection: IP65


    Receiver T20RX-02AKL/AKM

    Frequency: AKL-receiver; 433,92 MHz 

    AKM-receiver; 869,85 MHz

    Code comb.: Unique codes; 16.777.216 Relay output: 2, stores 15 codes on each relay, possibility to program; momentary/latching function on all relays 

    Power supply: 12-24V AC/DC

    Dimensions: 54 x 96 x 37 mm

    Protection: IP54


    PCB receiver T20RX-01AKL

    Frequency: 433,92 MHz

    Code comb.: Unique codes 16.777.216

    Relay output: Potential free, close 8A Power supply: 12-24V AC/DC

    Dimensions: 57 x 107 x 94 mm

    Protection: IP65


    PCB receiver T20RX-01ARL

    Frequency: 433,92 MHz

    Code comb.: unique code 16.777.216

    Relay output: Potential free, close 8A

    Power supply: 12-24V AC/DC

    Dimensions: 57 x 107 x 94 mm


    There are many more Tele Radio radio remote control systems available to meet your exact requirements. 


    Please contact Milwaukee Crane today.  Call toll free (800) 869-8091.  We are looking forward to working with you to configure the best Tele Radio system for your needs.

Accessories

  • Gorbel G-Force Lifters

    Gorbel G-Force� Electronic Balancers

    Intelligent Ergonomic Lifting Devices from Gorbel


    The Gorbel G-Force™ and Gorbel Easy Arm™ are part of a new family of Material Handling equipment known as Intelligent Assist Devices (IAD's).


    The G-Force™ Intelligent Lifting Device uses patented technology and an industrial processor controlled drive system to deliver unmatched lifting precision and speed.


    The Easy Arm™ Intelligent Lfiting Arm uses Gorbel's patented G-ForceTM technology and an industrial processor controlled drive system, integrated them into an ergonomic articulating jib design. 


    How G-Force Works


    The G-Force enables operators to lift and maneuver naturally, as if the device were an extension of their own arm.  The G-ForceTM will help improve productivity, reduce the cost of product damage, and minimize work related injuries. 


    The G-ForceTM is available in two series: the BXi series and the streamlined BX Series (lower cost alternative).  Both series are available in 150# and 300# capacities.  The G-Force is also available integrated with our Easy Arm articulating jib crane.


    Features:


    • Pinpoint precision - speeds from 1 foot per minute (0.3 mpm) up to 275 fpm (83mpm)
    • Blazing speed - travels up to 4 times faster than traditional high end lifting devices
    • Infinite speed control - ideal for applications that require high speed at some points in the cycle and slow, precise movements at other points

    The G-ForceTM ILD gives the responsiveness and flexibility of a human operator plus the power of a machine. It incorporates a range of speeds so it is perfect for quick, repetitive motions and slow, precise placements.


    New Ergonomic Lifting Study


    A new ergonomic lifting study shows that the G-Force outperforms other lifting devices in both high cycle and precision placement applications. View a PDF copy of the study.


    Download a Gorbel G-Force catalog in PDF

    (8068 KB)


    Download an Easy Arm Catalog in PDF

    (467 KB)


    G-ForceTM BXi Series


    The BXi model comes loaded with standard intelligence features and programmability to customize it to your application. This series comes in capacities of 150 and 300 pounds.  Higher capacities are available - contact Milwaukee Crane.


    Added Intelligence Capabilities:


    • Teachable virtual limits and speed reduction points - unit can be taught to stop or reduce speed when it reaches specific points in its lifting range
    • External inputs/outputs - endless possibilities exist for the I/O on the BXi model. Contact the factory for customized programming to maximize your BXi flexibility.
    • E-stop output - the E-stop can trigger or stop the external system that it is tied to (conveyor, CNC machine)
    • Option to interface with data systems via DeviceNet - external systems that use DeviceNet protocol can read or control the data points and parameters of the G-ForceTM
    • Easily accessible external communications port - any computer equipped with special software can be used to upgrade or monitor performance

    G-ForceTM BX Series


    This streamlined BX Series is a lower cost alternative for those applications that require the speed and precision of the BXi, but not the added intelligence and flexibility.  Available in 150# and 300# capacities.  Higher capacities available - contact Milwaukee Crane.


    Features:


    • Float mode capable
    • Inertia management
    • Mimics human motion
    • Precision capability
    • Speed range adjustment
    • Easy tooling integration
    • Operator indicator lights
    • Instant load fluctuation response system

    G-ForceTM Easy ArmTM

    The Brains of a G-ForceTM, The Body of a Jib 


    Easy ArmTM named Plant Engineering 2003 Product of the Year Bronze Medal Winner!


    The G-ForceTM Easy ArmTM is the newest addition to our family of Material Handling equipment known as Intelligent Assist Devices (IAD's). We took our patented G-ForceTM technology and an industrial processor controlled drive system and integrated them into an ergonomic articulating jib design. 


    Available in 150 pound capacity with standard spans of 6, 8, and 10 feet.


    This versatile design is ideal for lifting applications that involve:


    • Reaching under obstructions / low headroom applications-wire goes over a pulley on the beam so you don't lose the headroom taken by the G-ForceTM actuator
    • Reach around obstructions
    • Reach into work cells/doorways
    • Rapid change in direction - you don't have to move the weight of the actuator

    Please contact Milwaukee Crane's expert staff for assistance and information on Gorbel G-Force applications.

Share by: